Failure Code |
Fault Code Description |
Solution |
|
F0
|
Electronic oven control failure |
Replace electronic oven control (also called EOC or clock).
|
|
F1
|
Electronic oven control failure |
Replace electronic oven control (also called EOC or clock).
|
|
F2
|
Oven temperature too hot |
Replace relay board if faulty. Check and replace oven temperature sensor (RTD). If failure repeats, replace ERC (electronic range control or clock).
|
|
F3
|
Open oven temperature sensor (RTD) |
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
|
|
F4
|
Shorted oven temperature sensor (RTD) |
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
|
|
F7
|
Function key stuck |
Check all keys on key pad. Replace electronic oven control (also called EOC or clock) if other components check normal.
|
|
F8
|
Internal logic failure |
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) and ERC (electronic oven control) if wiring and everything else checks ok.
|
|
F9
|
Internal logic failure |
Check door latch and switches, replace if found defective. Replace ERC if other components check ok.
|
|
Fd
|
Bake and Broil relay drives act simultaneously. |
Check the relay board for damage. Replace if defective. Replace ERC if defective.
|