Ryan M Manvel , TX July 30, 2018 Appliance: Model WF419AAW/XAA-0003 Washer was walking severely The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a Phillips screwdriver. The shock absorbers required a 13 mm docket and 8” extension for the socket. Very easy repair overall. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers, Socket Set, Wrench Set