Billy P Derma , MS December 24, 2015 Appliance: Samsung Dishwasher DW80H9930US/AA-0000 Water wall movement assembly belt had broken Water wall movement assembly . Removed two screws at back of the assy. Raise the assembly slightly from the rear, then slide it back about one inch. Removed it, reversed the process. Entire job took about 5 minutes to complete.. Read More... 17 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Diana G Merritt Island , FL December 23, 2016 Water bar on samsung dishwasher broke Ordered the replacement assembly and replaced it. Took me about 15 minutes. There are two screws at the back of the unit covered with plastic tabs. I popped those off and unscrewed the screws. I lifted up the back piece and pulled it out. I placed the new assembly in and screwed it down. I almost forgot to put the tabs covering the screws back in. Works like a charm! Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Lonnie L Pingree Grove , IL May 06, 2017 Drive belt for the "water wall" broke Replaced entire assembly. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Curt A Baton Rouge , LA November 13, 2017 Appliance: Samsung Dishwasher DW80H9930US/AA-0000 Broken drive belt. Remove the two screw covers near the back of the part and remove the two phillips head screws. Lift part out from the back first then slide assembly off the forward attachment. Be sure to replace the two o-rings on the new part and reinstall in opposite manner. New part does not include the screw covers or o-rings so be sure not to damage them in the removal process. A little more involved, a temporary fix can be made while waiting on the new part. Remove the assembly and remove the belt from the lock down attachment on the sliding arm. Then reattach each end of the broken belt in the lock down device. Too bad the belt only can not be replaced - it would probably be a $6.00 part Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers