Donald G Lebanon , TN April 02, 2018 Appliance: Model RF28JBEDBSG/AA (0000) The temperature control on the "flex drawer" of my two year old Samsung rf28 dutch door refrigerator had failed I first replaced the cable from the door face to the refrigerator. That did not solve the problem. I next ordered the cable in the drawer face and the control panel on the drawer face. When it arrived I disconnected the cable from the drawer face and plugged the new cable and the control panel into the cable to see if that would solve the problem. It did! When I tried to disassemble the drawer face to install the new cable I found it impossible to open the assembly because it had been assembled using expanding insulating foam. I removed the control panel and found the circuit board and its connector significantly corroded, two wires had broken loose from the connector. I spliced the connector from the new cable onto the wires of the old cable in the control cavity, reassembled it and it works fine now. Read More... 6 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers, Socket Set