Mike M Muskogee , OK January 20, 2017 Appliance: Model WD330AEB/XAA Samsung clothes dryer fuse assembly in heating element housing inoperable A month ago I replaced the heating element in a Samsung Dryer, everything was working great, then it stopped heating again. I disassembled the dryer again thinking g the heating element had quit working again. After takining it apart again I found the element be still intact and okay. On the side of the elheating element housing are two other parts (1) the thermostat and (2) fuse assembly. I noticed the fuse assembly had a melted spot on it. I used a multimeter to check the contunity found it to be open. I replace the fuse assembly and went ahead a replaced the thermostat. I also replace the vent hose due possible airflow restriction. Put everything back together and dryer is working great. I am going to check the vent hose monthly, and keep it clean and free of any debris which will help with airflow and keep the parts working properly. Hope this helps. Read More... 12 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Raymond G Burlington , NJ April 03, 2018 Lint filter was clogged If I knew it this easy and cheap I would have done it sooner. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Les L Cedar City , UT June 11, 2017 Dryer element burned out. Watched video. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Irma B Rio Rancho , NM January 24, 2024 Appliance: Model DC61-01521A Lint filter broke. Replaced the lint filter. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes