John M Tyler , TX December 25, 2014 Appliance: Model DACOR SCR127 Bake element on dacor single wall oven did not work I e-mailed the symptoms to a pro. We together determined that it was the relay board. I ordered it on Monday, Dec 22, and received it on 24th at noon at the peak of the Christmas rush! I had downloaded the installation instructions from the online manual. It took me about 20 minutes to install, and it worked fine. I did not have to pull the oven all the way out, just about one-half way, and propped it up. Biggest problem was getting the board loose. Needle nose pliers were needed, but it still was a pain. The last plastic mount, I had to pull out with board. There were eight plastic mounts, and the ones toward the front were not very accessible. Eight mounts are really overkill, so I did not replace the one I pulled out. I'm good at fixing things, so I just was persistent! Electrical connections were tight, but used the needle nose pliers to pull them off. Just took one off at a time, and installed it on the new board. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers