Dishwasher Condensate Overflow Float Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303297420
Fix a dishwasher that won't fill or fills slowly with this water inlet valve. Restores proper water flow for normal wash cycles. Straightforward replacement.
More
$246.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304472095
This infinite burner switch controls heat output for a cooktop burner so you can adjust cooking temperature smoothly. Replaces a worn or failed control to restore variable heating response on compatible ranges. What it does:
- Regulates burner heat by varying power to the surface element for precise temperature control
- Commonly replaces switches that cause a burner to stay cold, not heat evenly, or only work at one setting
- Helps stop clicking, erratic heating, or loss of low/high heat range when the original switch fails
- Works as the user control interface behind the cooktop knob (requires matching shaft/terminal configuration)
What's included: One infinite burner switch (single unit as shown) Install notes:
- Disconnect power to the appliance before starting any repair to avoid shock or injury
- Verify shaft style and terminal layout match the original switch for proper fit and function
- Handle surrounding trim and glass cooktop pieces carefully to prevent damage during removal
More
$222.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 627512
This is a small micro switch used in the ice maker circuit to control the on/off function of ice production. It signals the appliance when to start or stop the ice making cycle based on ice level or timing. Replace this switch if your ice maker fails to produce ice, runs continuously without stopping, or does not cycle on and off properly.
More
$24.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8051729
$46.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8051730
Fix a dishwasher that won't start or respond to controls with this rocker switch replacement. Simple repair to restore button function and operation.
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10102260
Fix a dishwasher motor that hums but won't start or shuts down from overheating. This motor relay switch resolves intermittent pump operation issues.
More
$73.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10181604
Fix a dishwasher that won't start or advance cycles with this switch replacement. Common solution for unresponsive controls or stuck cycle problems.
More
$21.77
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X10067
This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:
- Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
- Helps prevent backdrafts, pests and rain from entering the vent system.
- Can restore normal drying performance when a stuck or broken flap was restricting airflow.
- Commonly replaced when the flap is cracked, warped, jammed or does not seal.
What's included:
- One vent flapper/exterior exhaust flap.
Install notes:
- Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
- Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
- Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
- Clean or repair the ductwork to avoid repeat failures.
More
$6.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD21X10393
This right switch breakwater helps position and protect the dryer control switch assembly, keeping the switch secure and preventing rubbing or shorting. It restores stable switch alignment for reliable control operation. What it does:
- Holds the right control switch in place to prevent movement and wear
- Protects the switch from contact with adjacent components that can cause sticking or intermittent operation
- Helps stop rattling or vibration-related noise from the control area
- Supports proper button/knob actuation for consistent user input
What's included:
- One right switch breakwater
Install notes:
- Intended for use in the dryer control area; inspect surrounding parts for related damage
- Disconnect power before servicing to avoid shock or accidental startup
- Use basic hand tools; do not overtighten fasteners to avoid cracking the plastic
- Replace damaged switches or mounting hardware together for best results
Do-It-Yourself Stories from Customers like You
Ge dishwasher door would not latch closed and would not turn on Tom O. • Westfield , NJ • January 17, 2016
Bought the 5 components that comprise the latch and switches, installed them and it works fine now. The GE Model GLDT696TSS-00 was less than 4 years old so it was great that I could purchase the parts from a supplier that had very reasonable pricing and fast shipping, but not a very good testament to the quality of GE's products.
Read more
More
$6.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 154089301
Dishwasher not starting or cycles not advancing? This power relay assembly controls electrical functions. Common fix for starting issues.
More
$224.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 154240404
A selector switch used to choose operating modes or settings on compatible Frigidaire appliances. Replacing a worn or failed selector restores reliable user control and lets the appliance respond correctly to setting changes. What it does:
- Acts as the user-facing control for selecting cycles, temperature, or function positions
- Routes power to the correct internal circuits based on the selected position
- Common symptoms: appliance won't change modes, selector feels loose or sticks, or settings don't engage reliably
- Helps restore accurate selection and repeatable operation when the original switch is faulty
What's included: One selector switch. Install notes:
- Disconnect power (unplug or shut off breaker) before attempting service
- Access may require removing the control panel or console; keep fasteners organized
- Avoid forcing the switch or contacts; inspect wiring and connectors for damage
More
$41.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300804149
$7.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300809782
Fix a dishwasher that won't heat or dry properly with this bimetal temperature switch. Common repair for heating issues. Moderate DIY difficulty.
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300809902
Fix a dishwasher that won't fill with water or fills slowly with this water inlet valve. Common repair for no water flow issues. DIY-friendly fix.
More
$49.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303351031
$10.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304452525
$116.95
Out Of Stock
Usually ships within 4 - 14 days