Dishwasher Float Switch Float Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3376397
Fix dishwasher overfilling or not filling with water by replacing the float assembly. Common issue with sticky buildup preventing proper operation.
Do-It-Yourself Stories from Customers like You
Inadequate cleaning of dishes / detergent residue all over the interior Randy N. • Elkhart , IN • September 19, 2015
I cleaned all the jet nozzles with a toothpick and a pipe cleaner to remove the hard water deposits. I then replace the ring bearing under the bottom spray wand and the ring bearing under the upper spray wand. I also replaced the smaller radial ring bearing. Although none of them looked overly worn, it doesn't take much to cause the spray wands to spray inadequately.
Then, I replaced the float and washer assembly. Although it appeared to work properly when I lifted up on it and let it down, it...
Read more
More
$73.95
- Compare At:
-
$87.26
- You Save:
-
$13.31
Genuine Bosch part
By: Bosch
Part Number: 00263833
Fix a dishwasher that won't fill, overfills, or leaks from the base. Water inlet valve controls flow into the tub. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Horrible smell when running a cycle Aaron H. • Los Angeles , CA • January 13, 2017
Bacteria buildup in the venting assembly and drain hose. Replaced them and it's back to normal
Read more
More
$150.95
- Compare At:
-
$181.14
- You Save:
-
$30.19
Genuine Bosch part
By: Bosch
Part Number: 00165301
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
- The dishwasher not filling or filling slowly
- Error codes related to fill issues
- Improper water levels impacting wash results
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Flood switch was stuck in on position drain pump would not turn off. Rick V. • Burlington , IA • April 05, 2017
Replaced the defective float switch.
Read more
More
$10.42
- Compare At:
-
$11.46
- You Save:
-
$1.04
Genuine Ge part
By: Ge
Part Number: WD49X23818
The Funnel Service Kit is an OEM replacement part for GE dishwashers. It includes a water inlet funnel and seals necessary for proper water flow within your dishwasher. This part helps prevent leaks and ensures that water is properly directed into the dishwasher.
Symptoms of a faulty water inlet funnel service kit include:
- Water leaks from the dishwasher
- Insufficient water flow during the wash cycle
- Inconsistent cleaning or rinsing performance
Causes of a bad water inlet funnel service kit can include wear and tear over time, blockage from debris or mineral buildup, or damage to the funnel or associated components. If you notice issues such as water leaks, inadequate water flow, or inconsistent cleaning results, it may be time to replace the old or damaged water inlet funnel service kit with this genuine OEM part.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$46.45
- Compare At:
-
$54.81
- You Save:
-
$8.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10077871
Fix leaking dishwasher or water overflowing onto the floor. This float assembly rises with water level to prevent overfills. Easy 5-10 minute repair.
Do-It-Yourself Stories from Customers like You
Leaking under right side Glen G. • Laplata , MD • December 06, 2015
Removed front kick plate, found overflow valve assembly leaking . When parts arrived removed and replaced overflow valve. Took about 10 minutes
Read more
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Lg part
By: Lg
Part Number: AJU33450703
Fix a dishwasher that won't fill or overflows with this water inlet valve. Solves filling issues and stops leaks. Moderate DIY repair in 30-45 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
overflowing
See more...
Do-It-Yourself Stories from Customers like You
Error code: EF in flow water valve would not close so water continued flowing in when power switch was turned on Mike G. • Jurupa Valley , CA • June 11, 2021
I replaced the valve.
Read more
More
$128.67
- Compare At:
-
$151.83
- You Save:
-
$23.16
Genuine Ge part
By: Ge
Part Number: WD12X10048
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Do-It-Yourself Stories from Customers like You
Flood switch defective flooded the floor Douglas B. • Portland , MI • January 09, 2017
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows.
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Bosch part
By: Bosch
Part Number: 00166635
Wax motor for detergent/rinse-aid dispenser.
Do-It-Yourself Stories from Customers like You
Soap dispenser door wouldn't open David H. • San Francisco , CA • May 15, 2015
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks.
Read more
More
$29.68
- Compare At:
-
$35.32
- You Save:
-
$5.64
Genuine Ge part
By: Ge
Part Number: WD15X10010
Dishwasher not filling with water or leaking? This water inlet valve controls water flow during the fill cycle. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
Upper sprayer arm not turning Carroll B F. • Newton , IA • August 03, 2019
Replace old with a new one with a seal in it worked like a new unit.
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Ge part
By: Ge
Part Number: WD15X10009
Fix dishwasher water leaks or no water flow issues with this water inlet valve. Controls water fill during wash cycles. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
No water, insufficient water Donald D. • St.Albans , VT • October 07, 2018
Replaced water valve. Using parts pro parts and you tube.
Read more
More
$75.95
- Compare At:
-
$89.62
- You Save:
-
$13.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
Fix a dishwasher with no control panel lights or one that won't start cycles. This switch assembly restores electrical signals for reliable operation.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
$103.68
- Compare At:
-
$124.42
- You Save:
-
$20.74
Genuine Samsung part
By: Samsung
Part Number: DD82-01588A
Not getting water in your dishwasher or water keeps running? The water inlet valve controls flow and prevents leaks. Common DIY repair fix.
More
$162.48
- Compare At:
-
$194.98
- You Save:
-
$32.50
Genuine Ge part
By: Ge
Part Number: WD21X479
This float switch detects rising water in the refrigerator drain pan or lower cabinet area and signals the appliance control to help prevent overflow and water damage. Use it to replace a failed or intermittent water-level sensor. What it does:
- Senses high water level in the drain pan or collection area and closes the circuit to alert the control.
- Helps identify causes of leaks and pooling under or behind the appliance.
- Commonly used when symptoms include water on the floor, drip pan overflow, or water-related error/alert conditions.
- Matches OEM function for refrigeration units that include a float-based water-detection circuit.
What's included: One float switch. Install notes:
- Disconnect power to the appliance before starting any repairs; shut off the water supply if working near water lines.
- Access may require removing lower kick plate or back panel; handle plastic clips and fasteners carefully.
- Disconnect electrical connector gently and note orientation before installing the replacement; secure wiring and verify float moves freely.
- Restore power and run a short test cycle or simulate water level to ensure proper operation.
Do-It-Yourself Stories from Customers like You
The dish washer was not fill with water Stanley B. • Newberry Springs , CA • December 14, 2014
1. Removed the water inlet/shut off valve, removed and cleaned the screen. while the valve was removed applied electrical power to the valve and it worked just fine.
2. replaced the broken float switch.
Read more
More
$71.95
- Compare At:
-
$85.58
- You Save:
-
$13.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268913
If your dishwasher shuts off mid-cycle or leaks water, a warped or stuck overfill float may be the cause. This 5-minute fix restores proper fill control.
Do-It-Yourself Stories from Customers like You
The display buttons kept flashing and the dishwasher would shut off Lynn P. • Pooler , GA • June 28, 2016
Replace the motherboard and used YouTube to replace float switch. Part ordered was exactly what I needed
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002207
Dishwasher won't start or stops mid-cycle? A faulty door switch prevents operation when it can't detect the closed door. Simple DIY repair.
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Frigidaire part
By: Frigidaire
Part Number: A00056506
This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:
- Provides the electrical on/off or function control for the appliance circuit.
- Replaces a failed switch that can cause intermittent operation or unresponsive controls.
- Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
- Connects to the existing wiring harness and mates with the original mounting points.
What's included: One switch assembly. Install notes:
- Disconnect power to the appliance before beginning any work.
- Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
- Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
- Restore power and verify the replaced switch operates the function correctly.
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61