Dishwasher Flapper Spring Parts

Dishwasher not draining or draining slowly? A worn valve flapper in the dual-pump assembly disrupts water flow. This repair restores proper drainage.

Replacement spring for dishwasher door latch handle. Restores tension so the handle returns to position and door latches securely. Replaces worn or broken springs.

This dome float is the replacement water-level float that helps the appliance sense and control the tub's water level, restoring reliable fill and shutoff behavior. Use this OEM-fit float when the original is cracked, stuck, or missing. What it does:

• Moves with rising and falling water to actuate the water-level mechanism and help prevent overfilling.
• Can reduce symptoms such as improper fill levels, continuous filling, or intermittent fill shutoff when the existing float is damaged or obstructed.
• Works as part of the washer's water sensing system—does not include electronic switches or housings unless shown.

• Disconnect power and unplug the appliance before starting any repair.
• Access may require removing the washer top or cabinet; follow your model's service instructions.
• Inspect surrounding hoses and clips; replace any damaged components and ensure the float moves freely.

Dishwasher overfilling or won't stop filling? This float switch lever activates the water level sensor. Simple DIY fix restores proper fill control.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Dishwasher door spring that counterbalances door weight via cable and reel system. Mounts to base. Replace if broken, worn, or missing.

Replacement spring for front-engine lawn tractors. Restores tension and function when original is stretched, broken, or missing from assembly.

This water inlet valve controls water flow to the refrigerator's ice maker and dispenser, restoring proper water delivery when the system won't fill or dispense. Direct-fit replacement that helps stop leaks and restore function. What it does:

• Opens and closes to let water into the ice maker and dispenser when signaled
• Stops water flow when the fill cycle or dispense cycle ends
• Common part to replace for slow/no ice production or no water from dispenser
• Replaced when valves leak or water lines fail to pressurize

• Disconnect power and shut off the water supply before starting work
• Verify tubing connections and electrical connector orientation before reassembly
• Inspect supply lines and gaskets; use proper replacement fittings if damaged

Tension spring that holds dishwasher doors, latches, or levers in place. Replace if your original spring is worn, broken, or missing.

Replace your dishwasher's tension spring if it's broken, worn, or missing. This spring provides the return force needed for proper component movement.

Fix a dishwasher that won't fill or fills slowly with this water inlet valve. Restores proper water flow for normal wash cycles. Straightforward replacement.

This spring secures the fine drain filter assembly in your dishwasher. Replace if the original is stretched, broken, or missing to restore proper fit.

Replace your dishwasher's door spring if worn, broken, or missing. This spring balances the door for smooth opening and closing, preventing slamming or sagging.