Range Hood I Retainer Manual Parts
Genuine Ge part
By: Ge
Part Number: WB02X11026
Secures the fan blade to the motor shaft, preventing vibration and noise. Replace if blade is loose or clip is missing to restore proper airflow.
Do-It-Yourself Stories from Customers like You
Plastic fan blade broke while being cleaned Margaret R. • Murrells Inlet , SC • April 30, 2017
Removed the brackets that sheltered the fan blade, removed the fan clip (was a little difficult but a needle nose plier was helpful), removed broken fan blade collar. Attached new fan blade and clip. Getting the new fan blade seated on the stem was difficult. I used a socket (so that the stem had room to move down onto the fan) and a rubber mallet on the socket to achieve a complete seating. Reattached brackets. Also ordered a charcoal filter to replace the standard filter. The charcoal...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10073
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
More
Genuine Broan part
By: Broan
Part Number: S99420472
This is a plastic retainer clip that holds the grease or charcoal filter in place inside a range hood. It snaps into the hood housing and keeps the filter securely mounted during operation. Replace this part if your filter is loose, rattling, or falling out of position.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10386347
Secures your range hood filter housing to keep the filter seated and properly sealed. Replace if the latch is broken or worn. Confirm fit with your model.
More
Genuine Bosch part
By: Bosch
Part Number: 00411008
This is a cable strap used to secure and organize wiring within a range vent hood. It holds cables in place to prevent them from interfering with the fan motor or other internal components. Replace this strap if the original is broken, missing, or no longer holding cables securely in position.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304482262
Installation kit for range hoods. Includes mounting hardware and adapters needed to install your vent hood. Replace missing or damaged components.
Do-It-Yourself Stories from Customers like You
Missing vent hood adapter Tillman M. • Atascadero , CA • May 26, 2014
Bought a new one from you, it fit great!!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00415298
Genuine Ge part
By: Ge
Part Number: WB02X10398
Genuine Ge part
By: Ge
Part Number: WB02X11042
Secures the grease filter inside your range hood. Replace if broken, loose, or missing to keep the filter properly positioned during operation.
Do-It-Yourself Stories from Customers like You
Light under the range hood stopped working. I determined that the light assembly was bad and decided to replace both. Edward B. • Mobile , AL • March 20, 2021
Unplugged broken lamp assemblies, and plugged in the new replacement parts.
Read more
More
$8.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00412296
This clip secures the upper dishwasher rack to its sliding assembly so the rack stays properly aligned and rides smoothly. A small but essential part for restoring stable upper-rack operation and preventing sideways wobble. What it does
- Holds the top/upper rack in place on the track or rail assembly
- Prevents the rack from shifting, sagging, or detaching when loading or pulling out the rack
- Restores correct rack alignment to help dishes load and wash evenly
- Simple replacement for common rack-tilt or rack-drop symptoms
What's included
- One replacement rack top clip
Install notes
- Basic hand tools may be required; inspect surrounding components for related wear
- Remove power to the appliance and follow manufacturer safety guidance before servicing
- If the clip is brittle or broken, replace matching clips on the same rack for even support
More
$10.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Broan part
By: Broan
Part Number: SV03686
Secure mounting clip for range hood installation. Replace if loose, damaged, or missing to ensure proper hood stability. Verify fit with your model number.
More
$40.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB2K36
Secures your range power cord at cabinet entry to prevent wire damage and disconnection. Replace if cord is loose or clamp is cracked. Confirm fit with your model number.
More
$4.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR01X10300
$6.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10416841
This water filter latch secures the refrigerator's filter housing so the cartridge stays in place and seals correctly. It restores proper filter engagement to help prevent leaks and ensure consistent water dispensing. What it does:
- Secures the water filter cartridge in the housing so the filter locks into place
- Helps maintain a proper seal to reduce the risk of water leaks
- Prevents the filter from becoming loose or falling out during normal use
- Can resolve symptoms like a loose filter, leaking at the filter area, or poor dispenser performance
What's included: One water filter latch Install notes:
- Turn off the water supply and remove the filter cartridge before servicing
- Handle plastic parts gently to avoid cracking; confirm the latch seats fully in the housing
- Do not use the appliance if water leaks persist after replacement
More
$8.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: 49-8932-1
Owner's manual and care guide for range hoods. Provides installation instructions, operating guidelines, maintenance schedules, and troubleshooting tips.
More
$11.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304454197
Secure mounting ring clip for range hoods. Replace if loose, damaged, or causing vibration. Verify fit with your model number before ordering.
More
$38.95
Out Of Stock
Usually ships within 4 - 14 days