Trash Compactor Nut Parts
Genuine Ge part
By: Ge
Part Number: WC02X20287
The Power Nut Assembly is an OEM replacement part for GE trash compactors. It plays a vital role in properly securing the ram drive belt in place to transmit rotational power from the motor to the compacting ram.
Causes of a bad power nut can include cracks, stripped threading, or a loose nut that fails to adequately tighten the belt. Over time, nuts can also wear out from repeated tensioning of belts during use.
Symptoms of a bad power nut include:
- The ram failing to extend fully or retract smoothly
- Compaction being inefficient with items not compressing fully in the waste bin
- Premature wear of the belt from improper tensioning
This OEM GE part is also compatible with Whirlpool, Kenmore, and some KitchenAid models.
Do-It-Yourself Stories from Customers like You
I have a ge trash compactor that is 1 1/2 years old the left screw power nut stripped David S. • Lancaster , PA • July 29, 2015
I was GREATLY surprised. I ordered 2 of the parts, to do both sides while I had it apart. The NEXT DAY the parts were at my door. I pulled the unit, and took out what seemed like a thousand screws to get the ram out. The parts just clip in. I had to straighten the ram and reassemble the unit. From removal of unit to turning it back on, total time---less than 2 hours. I have a bad back and only one good hand. If I was in the good shape I was 8 years ago, this would have taken about 1 to...
Read more
More
$25.27
- Compare At:
-
$30.07
- You Save:
-
$4.80
Genuine Ge part
By: Ge
Part Number: WC01X10034
This shoulder screw secures and guides the foot assembly, providing a precise shoulder for alignment and smooth movement. Replacing a worn or missing screw restores a snug, reliable fit and consistent operation of the attached component.
- Positions and secures the foot component at its mounting point
- Provides a smooth shoulder/bearing surface for proper alignment and motion
- Helps resolve looseness, wobble, binding, or misalignment in the foot assembly
- Replace if the original screw is stripped, bent, corroded, or missing
What's included: 1 shoulder screw Install notes:
- Disconnect power to the appliance before servicing
- Support the assembly to remove any load before removing hardware
- Retain any spacers or washers and reinstall in the original order
- Hand-start threads to avoid cross-threading; tighten snugly without overtightening
More
$11.62
- Compare At:
-
$13.83
- You Save:
-
$2.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614
Size: 10-24 x 3/8 inch.
Do-It-Yourself Stories from Customers like You
Timer/control failed Gilbert G. • Lansing , IL • July 09, 2018
Replaced timer control unit, first time doing this.
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X44D
Replacement mounting screw for securing panels, brackets, and components inside your appliance. Needed when original screws are stripped or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11759042
Power nut for trash compactor motor assembly. Secures the motor or drive components in place. Replace if cracked, stripped, or missing to restore stability.
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WC36X5089
$3.95
- Compare At:
-
$6.02
- You Save:
-
$2.07
Genuine Ge part
By: Ge
Part Number: WC1X5112
Genuine Ge part
By: Ge
Part Number: WC1X5143
Replacement washer for trash compactor assemblies. Installs between fasteners and components to distribute load and prevent damage. Order if worn or missing.
More
$9.48
- Compare At:
-
$18.72
- You Save:
-
$9.24
Genuine Ge part
By: Ge
Part Number: WC36X5044
Genuine Whirlpool part
By: Whirlpool
Part Number: 4154842
Replacement power screw nut for trash compactors. Mounts on the drive screw mechanism. Order a new nut if yours is stripped, cracked, or worn out.
Do-It-Yourself Stories from Customers like You
Broken bearing on screw drive Gary S. • Beach City , OH • June 26, 2015
Replaced broken parts
Read more
More
$36.68
- Compare At:
-
$44.02
- You Save:
-
$7.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Broan part
By: Broan
Part Number: S93260443
Mounting nut for trash compactor assembly. Secures internal components and mechanical parts. Replace if stripped, missing, or corroded during repair.
More
$2.34
- Compare At:
-
$2.78
- You Save:
-
$0.44
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC01X20047
Mounting screw for trash compactor installation. Secures panels and components in place. Replace if missing, stripped, or damaged during repairs.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC1X5137
Hex washer head screw for compactor assembly. Replaces lost, stripped, or corroded mounting hardware. Essential for securing components during repair.
More
$3.56
- Compare At:
-
$7.02
- You Save:
-
$3.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WC36X10038
Do-It-Yourself Stories from Customers like You
The handle and foot pedal of our ge profile trash compactor were broken and needed replacement Terrill A. • Knoxville , TN • June 09, 2017
I ordered the replacement parts and screws from AppliancePartsPros.com.
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 912619
$21.46
- Compare At:
-
$25.32
- You Save:
-
$3.86
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3131386
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Out Of Stock
Usually ships within 4 - 14 days