00617215 Parts

A replacement 3/8-16 nut that secures fasteners and assemblies on compatible Whirlpool appliances. Restores proper fastening so panels, brackets and components stay tight and aligned during normal operation. What it does:

• Fastens and secures bolts, studs or threaded shafts in appliance assemblies.
• Prevents loose connections that can cause rattling, vibration or misalignment.
• Used where a 3/8-16 threaded nut is required for structural or mounting applications.
• Replaces missing, stripped or corroded nuts to restore reliable mechanical connection.

• Disconnect power and follow all appliance safety procedures before servicing.
• Inspect mating threads and remove debris; replace if threads are damaged.
• Thread onto bolt or stud by hand first, then snug with the correct wrench; avoid overtightening.
• Follow the appliance manufacturer's torque and assembly instructions.

This is a carburetor gasket replacement that is for use with generators. The gaskets are an important feature of any engine. The gasket will help to provide an airtight seal for the carburetor. This will ensure that there is not too much air getting into the carburetor, which could cause problems with the air to fuel mixture. Too much air could mean that the engine will have trouble running. It could start to stall out. To ensure that the engine is performing properly, owners will want to check their carburetor gaskets. The gaskets will start to wear down over time. They can stretch and they can start to dry out and break. This means they will no longer provide an airtight seal. Owners should check their gaskets if they are noticing the generator's engine has trouble running and not stalling. When performing maintenance on the carburetor or rebuilding the carb, they should replace the gaskets. This is a genuine OEM part that has been sourced from Generac. The carburetor gasket is sold individually and is specifically for use with generators from Generac.

This is an authentic carb to air cleaner gasket sourced from Generac. The gasket is placed between the air cleaner and the carburetor, and it will act as another means to reduce the amount of air that is coming into the carburetor. This is important because if there is too much air, it will affect the fuel-air mixture that is going into the carburetor. This could result in problems with the engine's performance and consistency. The carb to air cleaner gasket will start to wear out the longer it has been used. It can start to dry out and crack, and parts of it could break off entirely. This would mean more air can get into the engine. To prevent this, owners will want to make sure that they check on the gasket and replace it as needed. This should be a part of the routine maintenance of the small engine. The carb to air cleaner gasket is a genuine OEM product that is sold individually. It is designed for use in certain models of Generac small engines, such as those found in generators and gas-powered pressure washers.

This Generac insulator gasket is for Generac brand generators. It is used to keep heat from the engine away from the carburetor. The longer the generator runs, the warmer it will get, and a properly functioning Generac insulator will prevent the device from overheating. After use and with normal wear and tear, these Generac insulator gaskets will begin to wear down and become ineffective. Users will notice the generator is getting too warm after running for some time, or the entire device may fail. A worn down or damaged insulator gasket must be replaced before continuing operations of the generator.Replacing a Generac insulator gasket can be done relatively quickly with the proper tools. Always wear protective gloves when repairing any engine components. Remove the old or ineffective gasket before replacing it with a new one. Ensure all parts are lined up and secure before starting the machine.This Generac insulator gasket is an authentic OEM replacement part. It is sold as an individual unit. The insulator gasket is for Generac brand generators only, and it fits several different models. The replacement part is made of high-quality, durable materials.

A spark plug is a component within a combustion engine system that ignites the fuel/air mixture and generates a tiny explosion that is what makes power inside the engine. When the generator fails to fire and no power is generated, it is time to replace the spark plug. While an engine may start when it has bad spark plugs, it will often accelerate slowly, use fuel inefficiently, or misfire, too. This is not a difficult repair and should take no more than an hour to complete. It will require a spark plug socket wrench, ratchet, screwdrivers, and a gapping set. The spark plug has a lead that is not touching the other plug, but which is close enough to generate an arc of current and create the electricity for a spark. Be sure that the plug has the correct gap. This is an OEM replacement spark plug designed for use in Generac generators and pressure washers. This part is sold individually.

This replacement air filter fits the engine on a generator. Air filters serve an important purpose in ensuing that dirt, dust, pollen, and other debris does not reach the combustion chamber, where it could cause damage. Instead, the filter traps and collects these contaminants. However, over time, the air filter will slowly clog with trapped debris, which will restrict airflow to the engine. This causes the engine to work harder than normal, consuming additional fuel, reducing performance, and increasing wear on internal components.Periodically, the owner will need to replace the air filter element. The frequency will vary based on use. Users should check their owner's manuals for specific change interval recommendations. To change the air filter, simply open the air filter housing, remove the old air filter, clean any debris that might have accumulated inside the box, and then install the new air filter. Close the housing when finished.This air filter is a genuine OEM part and is designed for specific Generac generators. It is sold individually.

This part is a 12-volt battery used on portable generators. The purpose of a battery is to provide the current needed to start the portable generator.A new 12-volt battery may be needed if the battery is dead and cannot be jump-started. Over time, batteries become weaker and need to be replaced after normal wear and tear over a period of time. If the portable generator will not turn on, it could be a result of a battery that has died or gone completely bad. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use extreme care when handling a battery.This 12-volt battery is a genuine Husqvarna part. It is sold individually. This particular 12-volt battery is compatible with outdoor power equipment that are manufactured by the Husqvarna brand and the Generac brand.

This replacement part is a brush holder assembly intended for use in generators. This is a genuine replacement part made by Generac Generators. Brush holders in generators are use as the connecting piece between stationary wires and other moving parts. This is an important part as they conduct the electric current inside the machine so it is able to operate smoothly.A new brush holder assembly might be needed if the machine is unable to start or if it stops abruptly during use. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with generators made by Generac Generators.

This part is a replacement tri LED display. This part's intended use is to replace a broken or defective tri LED display in generators.This part is important for safe and proper equipment usage and thus should be kept in good working condition. If broken, cracked, faulty, or burnt out, this part will need to be immediately replaced with a genuine OEM replacement part. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning any repairs.This is an authentic OEM replacement part from Generac made of high-quality materials. This tri LED display can be used with different models of generators that have been manufactured by Generac, Siemens, Honeywell, and some other brands. It is sold individually.

This is a gun assembly for a pressure washer, and it is made from high-quality plastic and metal. The assembly fastens the hose to the wand. The gun and trigger provides the user with greater control while cleaning. If any part of the gun assembly is damaged, it should be replaced to ensure the pressure washer functions properly.Gun assemblies are durable and meant to last. However, the individual parts are subject to wear and tear, especially the trigger. The plastic could also crack or break, particularly if the assembly is dropped. Metal elements could also corrode over time. Replacing the assembly is relatively simple but may require a pair of pliers to complete.The gun assembly is for use with a Generac model pressure washer. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is a "single" wheel typically used on generators. This is a genuine replacement part made by Generac. Wheels are an important part in this appliance as they allow the user to move the generator with ease. This type of appliance is made to be easily transported and the wheels make that possible. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part as the user will need access to the bottom of the generator. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with generators made by Generac.