106511133213 Parts

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

Color: White. Size: 1 qt. can. Acrylic appliance paint.

The Glass Shelf is an OEM part for Whirlpool refrigerators. It provides an organized storage surface for items in the refrigerator and freezer. The tempered glass shelf is designed to be durable and able to withstand regular use and handling of stored items. 

Causes of a bad glass shelf include impact or accidental mishandling that leads to glass damage over time, excessive weight loads that cause sagging, and normal wear and tear of the mounting hardware.

Symptoms of a bad glass shelf include:

• Cracked, chipped, or damaged glass that presents a safety hazard 
• A shelf that bows or sags under load instead of remaining flat and level
• A shelf that no longer mounts or slides securely in the refrigerator rails

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit

This ice door is the replacement chute cover that opens and closes for the refrigerator ice dispenser, helping keep cold air in and ice out of the cabinet when the dispenser isn't in use. It restores proper dispensing and reduces drafts at the dispenser opening. What it does:

• Serves as the moving cover for the ice dispenser chute, opening to allow ice to pass and closing afterward
• Prevents warm air and moisture from entering the freezer through the dispenser opening
• Helps reduce frost buildup and keeps the dispenser area cleaner
• Commonly replaced when the door is cracked, warped, or no longer seals and lets ice jam or fall freely

• One ice dispenser door

• Disconnect power (or unplug) prior to any service to avoid injury
• Handle plastic parts carefully to avoid cracking; use proper trim tools to remove surrounding panels
• Some models require removing the dispenser housing or door inner panel to access mounting clips

This replacement mounting ring secures small appliance components to maintain proper alignment and reliable operation. Use it when the original ring is worn, cracked, or missing to reduce play and restore normal function. What it does:

• Holds and centers components on a shaft or housing to prevent misalignment
• Replaces a worn or damaged ring that can cause excessive movement or noise
• Helps maintain stable operation of the assembly it secures
• Small, durable part used where a precision spacer or retainer is required

• Disconnect power and follow all safety procedures before starting repairs
• Inspect surrounding parts for wear; replace any damaged components to prevent repeat failure
• Use appropriate hand tools; do not force the ring into place

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling

This replacement mounting bracket secures and supports appliance components to restore proper alignment and reduce vibration. It's a simple, durable metal bracket used where a stable mounting point is required. What it does:

• Provides a secure attachment point to hold panels, assemblies, or hardware in place
• Prevents movement that can cause rattling, noise, or misaligned panels
• Restores factory fit to reduce wear on adjoining parts
• Helps maintain safe, stable operation by keeping components properly positioned

• One mounting bracket

• Disconnect power to the appliance before starting any repair
• Verify bracket orientation and match to existing mounting holes before fastening
• Use the original screws or manufacturer-recommended fasteners; do not overtighten

This is a replacement front door panel that restores the appliance's sealed front surface and appearance. It provides a proper mounting surface for the latch and helps keep the door aligned for normal operation. What it does:

• Replaces a damaged, dented or cracked front door panel to restore fit and function
• Provides the proper surface for door latch and handle attachment to ensure secure closing
• Helps maintain the appliance's internal environment by supporting correct door alignment
• Restores the appliance's finished appearance when the original door is cosmetically damaged

• One replacement door panel

• Installation recommended; door may be heavy or bulky
• Turn off power and water and follow manufacturer safety guidance before starting
• Retain all fasteners and brackets from the old door unless replacements are provided
• Verify fit and orientation against the original part before final assembly