11046744675 Parts

This is a hose connector that attaches to the outlet or drain hose on the washer, ensuring a secure, leak-free connection for water flowing out of the machine. Replace this connector if you notice water leaking at the hose junction, if the connector is cracked or corroded, or if the hose keeps slipping off during the drain cycle.

This is the lower cover panel for the detergent dispenser drawer on a front-load washing machine. It snaps onto the bottom of the dispenser drawer to enclose the compartment and direct water flow properly during the wash cycle. Replace this cover if it is cracked, missing, or warped, which can cause detergent to dispense incorrectly or water to leak from the dispenser area.

Replaces the large stationary outer tub that holds water and supports the inner basket. Order when tub is cracked, leaking, or structurally damaged.

This exhaust hose carries drain water from the pump to the external drain connection on your washer. Replacing a worn or damaged hose restores proper draining and helps prevent leaks and musty odors.

• Directs discharge water from the drain pump toward the outlet
• Maintains a sealed flow path to help prevent leaks
• Age, vibration, or debris can cause cracks, splits, or clogs
• Common symptoms: water leaking under the unit, slow or no drain, visible cracks/kinks on the hose

• Disconnect power and turn off water supply before servicing
• Place towels or a pan to catch residual water; remove access panels as needed
• Compress/release spring clamps, transfer them to the new hose, and fully seat hose ends
• Run a short drain cycle to check for leaks

Fix detergent not dispensing or leaking from the top of your washer. This drawer holds detergent and additives. Takes 30-40 minutes to replace.

Fix detergent not dispensing or musty odors with a new dispenser divider. This small part routes powder or liquid detergent properly. Easy DIY fix.

Fix a washer that fills when off or leaks at the inlet valve with this L-shaped flowmeter hose. Connects water inlet to flow sensor. Easy 30-minute repair.

Includes water temperature sensor.

Fixes loud banging and excessive vibration during spin when suspension spring hangs loose. This bracket secures the spring to the cabinet for stable operation.

Replace this washer O-ring seal to stop leaks and restore watertight connections. Install when you notice drips or water damage at joints. Verify fit.

Secures the drain hose to the washer cabinet or pump. Replace this retainer clip if it's broken, cracked, or missing to keep the hose properly attached.

Replacement water inlet hose for washers. Connects to water supply and directs incoming water into the machine. Replace if cracked, leaking, or damaged.

Flexible water connection hose for washers. Replace this hose if cracked, split, kinked, or leaking. Connects water supply between components.

Washer won't power on or trips breakers? A damaged power cord cuts electrical supply. Direct plug-in replacement, takes minutes to install.

This bolt secures the washer motor to its mounting bracket inside the washer cabinet. It keeps the motor stable during operation to prevent excessive vibration and movement. If your washer is making unusual noises, vibrating excessively, or the motor seems loose, this mounting bolt may have come loose or broken.

This is the inlet nozzle that directs water into the washing machine tub during the fill cycle. It connects to the water inlet valve and channels water flow into the drum. Replace this nozzle if you notice restricted water flow, leaking at the tub entry point, or if the nozzle is cracked or clogged with mineral deposits.