1109944236200 Parts

This wire harness connects the gas valve and igniter assembly so the range/oven can receive ignition and control signals. It replaces a worn or damaged connector bundle to restore reliable ignition performance. What it does

• Routes power and control signals between the gas valve and the igniter/spark module
• Restores ignition function when factory wiring is frayed, cut, or has poor connections
• Helps eliminate intermittent sparking or failed ignition caused by damaged wiring
• Matches OEM wiring layout and connector end shapes for a direct replacement

• Disconnect electrical power and shut off gas supply before starting work
• Verify the harness matches your appliance by comparing connector shapes and wire colors to the original
• Route wires away from sharp edges and high-heat areas; secure with existing clips or ties

This cove transition panel is the black trim piece that restores the look and fit between your cooktop and control area. It provides a finished appearance and replaces a cracked, bent, or missing transition trim. What it does:

• Covers the gap between the cooktop and control/cabinet area for a clean, finished appearance
• Replaces damaged, cracked, or warped trim that can affect panel alignment
• Helps maintain correct spacing and fit of adjacent trim pieces
• Restores original factory appearance after collision or wear

• Disconnect power to the appliance before starting any work
• Handle edges carefully to avoid cuts and prevent scratching the finish
• Minor disassembly of surrounding trim or panels may be required; keep fasteners organized

This replacement mounting screw secures appliance panels and small components to restore proper fit and reduce movement. It's a simple, direct part for repairing loose panels, trim, or interior assemblies. What it does:

• Fastens panels, brackets, or assemblies to prevent rattling and vibration
• Restores proper alignment for doors, control panels, or trim pieces
• Helps stop intermittent noise caused by loose hardware
• Use when original screw is missing, stripped, or corroded

• Disconnect power and unplug the appliance before beginning any repair
• Use the correct screwdriver bit and hand-tighten; avoid over-torquing which can strip threads
• Keep small parts away from children and pets; magnetic tray helps prevent loss
• If multiple screws are corroded or hardware threads are damaged, inspect mating parts and replace as needed

This ignition set consists of an ignition breaker and condenser. It is made of durable materials and uses a mechanical switch to close the electrical system and make a spark. If these parts are not working correctly or are broken, the engine on the lawn equipment will not start so the machine cannot be used. If the ignition set might not be working, use a spark tester with a plug lead to test. Place the control on stop or shut it off and attempt to turn on the engine using a key or cord. There should be no spark. When in the on position, a spark should be present. If the spark doesn't occur, there may be broken wires, grounds, shorts, or defects, so the parts will need to be replaced.This ignition set is a genuine OEM replacement part that was sourced directly from the manufacturer. It is sold as a single kit. The part is designed to be used in lawnmowers, tillers, leaf blowers, and snowblowers created by Cub Cadet, Briggs & Stratton, Broan, Lawn-Boy, and Toro.

This drum baffle restores the internal lift inside the dryer drum to help separate clothes and promote even tumbling. Replacing a cracked or missing baffle can reduce banging noises and help restore consistent drying performance. What it does:

• Lifts and moves clothes for more even tumbling and airflow inside the drum.
• Helps prevent garments from bunching or wrapping around the drum during a cycle.
• A damaged or missing baffle can cause loud thumping, scraping noises, or uneven drying; replacing it addresses these common symptoms.
• Designed to match the OEM drum mounting points for proper fit and function.

• Disconnect power (and gas, if applicable) before servicing the dryer.
• Access typically requires removing the dryer front or drum; keep track of fasteners and take photos for reassembly.
• Use basic hand tools and avoid forcing parts; inspect mounting hardware and drum condition while replacing the baffle.

This white top console replaces a damaged or faded console on compatible Whirlpool laundry appliances, restoring the control-area appearance and providing a clean mounting surface for the control panel and knobs. Designed to match factory fit and finish. What it does:

• Replaces cracked, dented, or discolored top console to improve appearance and protect internal controls
• Provides the mounting surface and alignment points for the control panel and user interface components
• Helps reduce dirt and moisture entry into the control area when properly installed
• Restores proper spacing and clearance for knobs, buttons, and display bezels

• Always disconnect power to the appliance before starting work
• Basic hand tools are typically required; follow factory service instructions for removal and reassembly
• Support the console while removing fasteners to avoid dropping or scratching the part
• Secure all fasteners; test controls after reassembly