11A-Azm5700 Parts

This secondary air valve gasket is an OEM replacement part that is sourced directly from the manufacturer for use on lawnmowers and other lawn and garden machines. The secondary valve is commonly known as the idle valve, and this gasket is used to protect the valve from contaminants and to keep the air and pressure at preset levels. If the gasket is worn or torn due to regular use, it will need to be replaced. If the idle on the engine is not functioning correctly, the engine dies when it should be idling, which is a good indicator of a secondary air valve gasket problem. If the engine idles too high, this could be another sign of problems with the gasket. Before replacing the secondary air valve gasket, drain the fuel from the machine and take the spark plug out to prevent accidental engine starting. Use the engine diagram to locate and remove the secondary valve gasket. Install the new gasket and reinstall the parts removed from the engine.This secondary air valve gasket is sold individually. It is compatible with lawnmowers, lawn tractors, and other small engines manufactured by Cub Cadet, MTD, Husky, Troy-Bilt, Yard-Man, and Yard Machines.

This fuel tank upper grommet can be used to easily replace one that has worn out or deteriorated, allowing equipment to run smoothly for longer.Fuel tank grommets are required to ensure fuel does not leak from the area between the fuel filter and the fuel tank. Throughout their life, grommets will experience wear and tear which can easily cause them to weaken. To prevent fuel loss, replace the grommet when it begins to show signs of deterioration. These grommets can easily be replaced at home.This fuel tank upper grommet is an OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel tank grommet is compatible with various different models of MTD, Cub Cadet, Craftsman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and log splitters. Please note this fuel tank grommet is sold individually.

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This is a piston that is designed for use with several types of lawn and garden equipment. The main purpose of the piston is to seal off the pressurized combustion chamber from the crankcase. It takes the combustion power and transfers it to all of the working parts of the equipment. If the piston is going bad or has been damaged, the tool may have poor performance, the exhaust may create white smoke, or the equipment may burn oil excessively.A compression test can determine whether the pisons are malfunctioning. This involves taking a spark plug out of the engine and then starting the tool with a compression gauge attached to the cylinder where the spark plug used to be. If there is a problem with the compression, the piston will need to be replaced.This piston is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The piston is designed to be compatible with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This is a piston pin that is used in many types of small engine lawn and garden equipment. The piston pin is a component that connects the connecting rod to the piston. It acts as a bearer that allows the connecting rod to pivot whenever the piston is moving. The pin is a hollow rod made of durable materials but constant wear and tear can damage the part or cause it to break.If the piston pin is broken or damaged, it will need to be replaced. A pair of pliers and an Allen wrench may be needed to complete the replacement. The process involves removing the access covers and the housing from the piston crank. The old piston ring can be removed from the connecting rod so the new component can be installed. After installation, reassemble the equipment.This piston pin is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pin is designed to be compatible with wood chippers, log splitters, edgers, string trimmers, tillers, and lawnmowers manufactured by MTD, Craftsman, Yard Machines, and Cub Cadet.

Air filter housing for walk-behind mowers. Replace if cracked, damaged, or causing air leaks that affect engine performance. Verify fit with your model.

Pulley and spring assembly for walk-behind mowers. Replace if pulley wobbles, spring breaks, or drive engagement fails. Verify fit with your model number.