We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.
Replaced connecting rod. Ordered rod ( which comes complete with cap and cap screws.) I ordered cap screws, but didn't need them. I was reimbursed for cost of screws. I now have a working generator! Thank you for having parts at very reasonable prices. Read more
Usually ships within 4 - 14 days
Replacement screw that secures the pawl friction plate in lawn and garden engines. Replaces lost, stripped, or damaged flange bolts on the recoil assembly.
This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.
Replace a worn valve retainer if your engine has compression loss or valve train noise. This washer-shaped part secures the valve spring lock on the valve.
Hardware screw for securing components on lawn and garden engine equipment. Replace stripped, lost, or damaged screws on housings and covers. Standard fastener.
This crankcase gasket is a replacement part for lawn and garden equipment. It's made to keep the crank from being exposed to the elements and protected from oil and other hazards. This part is located between the crankcase cover and the engine block and is made of a waterproof material that fits the engine block. There are also holes in the component where the crankcase bolts go. If the lawn mower is using a large amount of oil or there is an oil leak noticed, this is an indication that the crankcase gasket needs to be replaced. The original gasket should be peeled off and the new replacement part should be placed against the engine block. Put back on the crankcase cover, tighten the bolts, and ensure the gasket is sealed in place. At this point, oil can be added back to the engine. This is a genuine OEM replacement part that can be used with Briggs & Stratton, Simplicity, Craftsman, Cub Cadet, and Toro lawn mowers, wood chippers, tillers, log splitters, leaf blowers, and generators. Installing the crankcase gasket will require a nut drive, screwdriver, wrench set, and socket set. This original replacement part is sold individually.
This part is a replacement intake valve. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken or defective intake valve on different models of small engine outdoor power equipment. The intake valve is what directly controls the flow of fuel vapor. This part can become worn, broken, or can begin to get stuck over time, preventing fuel vapor from flowing properly. In this case, the part will require replacement. Special tools may be necessary to install this part properly. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this intake valve, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This intake valve can be used with a variety of small engine outdoor power equipment and generator models manufactured by Midwest Engine and other brands.
The replacement crankcase gasket seen here is for use with many different types of lawn and garden equipment. The purpose of the crankcase gasket is to fit between the crankcase and the crankcase cover. It helps to make sure that there are no oil leaks that could cause issues with the engine or make a mess when the machine is being stored. Owners should check on the gaskets when they are performing maintenance on their machines. Over time, the gaskets can start to crack or dry out. When this happens, it means that a leak is likely going to occur if it hasn't already. Owners will want to replace these gaskets regularly to ensure they do not have leaks. This is a genuine OEM replacement crankcase gasket that is sold individually. The durable gasket will work for models of many types of machines including lawn mowers, tillers, leaf blowers, generators, wood chippers, log splitters, and certain other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Simplicity, and Cub Cadet.
This high-quality replacement oil seal prevents oil from leaking where the camshaft exits the crankcase. The camshaft is made of many rotating metal pieces, and while the engine is running, it creates a stupendous amount of thrashing. To keep these parts from rubbing together and overheating, the camshaft needs a good amount of oil. This oil seal helps maintain the right balance of oil in the camshaft. Oil seals can degrade over time after having hot oil repeatedly splashed on them. The most common problem with an oil seal is that it has shrunk or warped and will no longer make a true seal. When this happens, the oil will leak from the engine and the camshaft will begin to overheat. The difficulty of this repair will depend on the lawn appliance that needs repair, but expect to remove the camshaft in order to replace the seal. This part is compatible with engines made by Toro, Lawn Boy, and Briggs & Stratton. It comes sourced from its original manufacturer and ships individually.
Replace a worn, damaged, or missing piston pin in your engine. This small pin connects the piston to the connecting rod and requires replacement when bent or broken.