14305991 Parts

This is a carburetor bowl. It holds the gas that is mixed with air before it enters the engine. The carburetor bowl contains a float which regulates the amount of gas needed to mix and fuel the engine.There are times when the carburetor in of itself is considered in good working order but the bowl may be compromised. This can happen if the bowl has been corroded. Rust will damage the carburetor bowl and render it ineffective. When replacing the carburetor bowl, be sure to work in a well-ventilated area and to wear the proper gear when handling engine parts. Once the carburetor is free from the engine, unscrew the bowl from the unit over a catch pan. Any contents will fall into the pan. Disassemble the old bowl's hardware and use it when installing the new bowl.This is a genuine OEM part manufactured by Tecumseh. It is compatible for Toro, Cub Cadet, and MTD engines.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This is an oil drain cap for lawn equipment. It is sometimes called a pipe cap. It sits at the bottom or side of the oil pan and helps to ensure that the oil in the motor does not leak out. If the oil drain cap is stripped or not functioning properly, it could mean the engine will start to leak oil, which will hamper the performance or cause additional damage.This component may start to corrode with extended use, or the threads could become damaged. The oil drain cap is relatively simple to replace. A wrench will be needed to replace this part. Wait until the engine is cool and then disconnect the spark plug wires before starting work.This oil drain cap is intended for use with lawn equipment from Tecumseh, Toro, MTD, Husqvarna, and Craftsman. The piece is sold individually, and it is a genuine OEM replacement part.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

This is a genuine replacement exhaust valve. The exhaust valve allows the engine to exhaust as needed. This part also includes the retaining ring, which holds the valve in place as it moves in and out to allow the exhaust to escape from the system. Over time and due to repetitive motion, this valve can break down or become damaged. A replacement will be necessary for proper operation of the machine. If the exhaust valve is faulty, the engine may not run correctly. It may not run at all. A replacement will ensure proper operation of outdoor equipment. Be sure to wear gloves and allow the engine to cool completely before doing any type of engine repairs. This OEM exhaust valve is manufactured by Tecumseh. It meets manufacturer standards for an OEM replacement and is compatible with several machines from the brand. The exhaust valve is sold as an individual part and does not include any additional parts or hardware. Those must be purchased separately.

This is a genuine fuel line replacement that can be used with select small engines found in outdoor lawn and garden equipment. The fuel line is responsible for delivering or returning fuel to or from the engine while it is in operation. The engine typically has a fuel return line and an intake line, and both can become corroded, worn, or cracked over time with constant exposure to chemicals and high temperatures. If the fuel lines are damaged, they can leak or fail to work at all, making the engine inoperable. When doing repairs, both lines should be replaced at the same time for consistency. This genuine fuel line provides an exact fit for compatible models. This genuine OEM fuel line is manufactured by Craftsman and designed for use in engines on their lawn and garden equipment, as well as certain models from MTD. It can be used on 4-cycle engines found in lawn tractors and chipper/shredder units that are compatible. This fuel line is made of durable rubber and sold as a single unit. Those who need two lines will have to purchase additional quantities. Always drain the fuel and disconnect the spark plug before working on the fuel tank assembly or fuel lines of any engine.