14D34633 Parts

An in-line fuel filter prevents contaminants from entering the carburetor and engine. In any engine, if the in-line fuel filter becomes clogged for whatever reason, the fuel cannot flow freely to the carburetor. This can prevent the engine from starting or may shut off the engine during operation when the fuel supply is interrupted. Without any gas, the engine cannot run. Any number of things can cause the filter to become clogged. Examples of typical clogging culprits are lawn clippings, mulch, stones or rocks, or contaminants from poor-grade fuel. If your engine stops or won’t start up, remove the old in-line fuel filter, and replace it with the new one. If this does not fix your problem, the carburetor may need cleaning or replacement due to damage from the contaminants, as well. The outside material of this fuel filter is plastic, while the inside material is comprised of a filter component interior. This in-line fuel filter is manufactured by Briggs & Stratton. It is compatible with engines on lawnmowers, lawn tractors, snowblowers, and generators manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Murray, MTD, Simplicity, Snapper, Toro, and Troy-Bilt. It is for engines that are supplied fuel by way of a fuel pump. This is a genuine OEM part and is sold separately as a replacement.

This oil seal is a common part engineered to work in engines that power generators, vacuum cleaners, snowblowers, leaf blowers, mowers, and other small engine applications. The seal sits between the crankcase and the crankshaft. It is designed as a barrier to prevent oil leakage and to stop contaminants from leaving the crankcase. When the gasoline engine exhibits diminished power, and especially if it begins to emit oily gray or bluish smoke, there is a good chance the oil seal needs to be replaced. In order to replace the faulty seal, begin by removing the starter housing and taking off the nut that holds the starter wheel to the main shaft. The user will find the old seal on this shaft. Remove it and install the new seal, pushing it into place with the edges of a socket, then tapping it securely into place with a hammer. When choosing a replacement seal, remember to use an OEM genuine replacement part that is guaranteed to match the specs for the original part. This will ensure a quality match and long replacement life. This seal is compatible with Toro, Lawn-Boy, and Briggs & Stratton engines.

This genuine replacement crankcase gasket creates an airtight seal on the crankcase so that oil and air do not leak out of the engine when it is running. Over time, this gasket is exposed to extreme pressure and high heat and will naturally deteriorate. It could become faulty and create leaks or it could break entirely. In either case, a full replacement of the gasket is the only solution. This OEM part can provide an exact fit for compatible lawn and garden equipment engines. This genuine crankcase gasket is manufactured to strict standards by Briggs & Stratton and is compatible with select engines on lawn mowers and generators from Briggs & Stratton, Lawn Boy, and Toro. This gasket is made of durable composite material and it is sold as an individual unit. Other gaskets, hardware, or related parts are all sold separately. The repair can be done with just a wrench, but be sure to allow the engine to cool entirely before beginning any repairs. Always wear gloves and disengage the spark plug for safety when performing engine work.

This is a replacement air cleaner cartridge is used to help ensure that dust, dirt, and other debris do not make their way into the carburetor and the engine. The filter is made from pleated paper in a plastic case. The air cleaner cartridge is a filter that is designed to trap debris, which means it inevitably becomes dirty with use. Eventually, it could become clogged or have other issues that would cause problems with the performance of the engine. It should be checked and replaced whenever it is not working to its full capacity, or as a part of regular maintenance. Replacing the filter is simple. Owners will remove the air cleaner cover, remove the old cartridge, replace it with a new one, and then secure the cover. The genuine OEM air cartridge cleaner is sold individually and does not include a foam prefilter. The cleaner is used for lawn mowers and other small engines, and it is compatible with certain models from Briggs & Stratton and Cub Cadet. Owners should always double-check to ensure they are getting the property air cartridge cleaner to work with their small engines.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This authentic replacement oil seal is for use with a range of small engines. The oil seal is the lower seal that is located in the engine's sump. The seal is made to ensure that there are no oil leaks that could cause issues with the performance of the engine. If the seal is not working properly, it could result in leaks, and the machine may not have enough oil to function properly. Lack of oil can also cause serious issues with the engine. The oil seal is prone to wearing out over time. The seal can become worn and it can start to deteriorate the longer it is used. Owners should make it a point to replace the oil seals whenever they are changing their oil, oil filter, and gaskets. The oil seal is a genuine OEM replacement part, and it is sold individually. The oil seal is compatible with more than 150 different models of machine. This includes models of lawnmower, snowblowers, pressure washer, leaf blowers, generator, wood chipper, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Lawn-Boy, and Simplicity.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

The spark plug boot is a rubber piece that is responsible for connecting the spark plug to the spark plug wires and completing the connection. Spark plugs are necessary to create the engine spark that will start the motor in lawn equipment and other small engines. The boot holds the terminal and keeps everything protected from the elements and insulated so that it continues to work correctly. If the spark plug connection seems weak or if the existing boot is damaged, this replacement could provide the solution. This durable rubber boot will insulate the spark plugs and help any small engine run better. This spark plug boot replacement can be used with a number of Briggs & Stratton engines and is compatible with hundreds of different machines from Toro, Lawn-Boy, and Briggs & Stratton. This boot replacement is sold individually as a single piece and does not include the terminal or any other housing or materials.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This valve retainer is an authentic replacement part for use with many types of small lawn and garden engines. The retainer valve helps to keep the lock valve spring on the valve. It is shaped similarly to a washer, which will fit over the top of the valve spring. The piece also helps to add space between the valve spring and the head of the valve. The valve retainer is made from metal, and it is a small piece. The retainer could become lost and need replacement when performing other maintenance on the engine's valves. The metal could also become corroded or break. In those cases, it will need to be replaced as soon as possible. This is a genuine OEM replacement part that is sold individually. The part can be used with many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, edgers, leaf blowers, log splitters, and wood chippers. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, MTD, Simplicity.

This is a flywheel key that is used in many types of lawn and garden equipment. It is fits into a slot located on the crankshaft. It also aligns with the keyway found on the flywheel. This flywheel key is tasked with ensuring the flywheel makes rotations in time with the crankshaft. The key can become damaged or lose and will need to be replaced to ensure the lawn equipment can continue to be used.Inspecting the flywheel key involves removing the gas tank and cowl from the equipment. From there, a user can determine whether the part is damaged or broken. If it needs to be replaced, the part can be removed from the flywheel, and a new flywheel key can be installed. The process takes little time and requires only a nut driver and a wrench set. Make sure to reassemble all parts before using the tool.This flywheel key is an authentic OEM replacement component sourced directly from the manufacturer. It is sold as a single part. The key can be used with wood chippers, leaf blowers, tillers, and lawnmowers manufactured by Simplicity, Briggs & Stratton, Cub Cadet, and Snapper.

This part is a replacement float bowl gasket. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a snapped, worn, or otherwise defective float bowl gasket in various engines. This float bowl gasket seals the gap between the float bowl and the carburetor, which helps to prevent fuel from leaking. Gaskets are particularly subject to wear and tear, and over time will become weathered, brittle, or otherwise deteriorated, thus requiring replacement. If you notice fuel leaking from the engine, this gasket may need to be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this float bowl gasket, the appropriate owner's manual and equipment diagrams should be referred to. This float bowl gasket is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with small engines that have been manufactured by Midwest Engine and Briggs and Stratton.

This replacement part is a float bowl. This part is a small part of the carburetor and is able to hold a small amount of liquid gasoline. This serves as a reservoir for fuel.If the engine is unable to run due to lack of fuel, it might be because of a malfunctioning float bowl. Be sure to wear work gloves during this repair as working near the carburetor might be dangerous in certain situations. This is a genuine replacement part made by Midwest Engine. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.