2000S Parts

This OEM fuel pump diaphragm creates a tight seal for the fuel pump so that air or moisture cannot enter the fuel. If the seal is broken, it will affect the performance of the outdoor power equipment machine.A new fuel pump diaphragm may be needed if the outdoor power equipment machine does not start, sounds sluggish, or stalls. There may be excessive smoke present. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine Husqvarna sourced directly from the manufacturer and sold individually. This fuel pump diaphragm is compatible with outdoor power equipment manufactured by Husqvarna, Poulan, Paramount, Weed Eater, or Jonsered. This outdoor power equipment could include blowers, chainsaws, edgers, hedge trimmers, saws, or grass trimmers.

This is a wave washer, also called a wave spring washer, that is used in many types of lawn and garden equipment. The wave washer is a small metal disc with a hole in the middle. Rather than being flat like most washers, the wave washer has waves that offer three, four, or six points of contact to better carry a load and create a large range of deflection.As the equipment containing the wave washer is used, it can experience damage or wear and tear. When this happens, the wave washer will not operate as expected by holding the load and assisting other components in the equipment. The equipment will need to be disassembled to reach the wave washer. Remove any parts in the way and remove the old component before replacing it with a new part.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The wave washer is sold as an individual part. The washer is made to be compatible with string trimmers, leaf blowers, chainsaws, carpet cleaners, and trash compactors manufactured by Turf King, Paramount, Broan, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman.

The attachment hanger holds the line trimmer attachment when it is not being used. The part is made of durable plastic, but it can experience wear and tear or damage due to impact. If the attachment hanger is broken, it will need to be replaced so the line trimmer has a place to hang.Taking a quick look at the attachment hanger will give insight into whether it's cracked, broken, or otherwise damaged. This is an easy component to replace since it snaps off of the lawn equipment. All that one needs to do is take the old one off and install a new one. Once it has been installed, the new attachment hanger can be used to hold accessories when the machine is running.This attachment hanger is a genuine replacement part sourced directly from the manufacturer. It is sold as an individual component. The hanger is designed to be used with string trimmers, pole pruners, and chainsaws manufactured by Craftsman, Weed Eater, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This snap-in bushing provides a low-profile bearing surface to support rotating shafts and reduce wear and noise in appliance assemblies. It restores smooth operation where the original bushing is worn or damaged. What it does:

• Provides a replaceable bearing/sleeve for rotating shafts and posts
• Reduces friction and wear on housing and moving parts
• Helps eliminate rubbing, grinding, or rattling noises during operation
• Maintains correct shaft alignment for smooth rotation

• One snap-in bushing

• Disconnect power before servicing and follow all safety instructions
• Access may require removing panels or covers; inspect surrounding parts for wear
• Press or snap the bushing squarely into the housing until fully seated; avoid deforming it
• Replace any damaged retainers or seals and test operation after reassembly

This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This clutch bearing is a genuine Husqvarna part, sold individually. A clutch bearing can be used as a replacement part in a string trimmer or a chainsaw. This genuine OEM part is meant to function as a fastening component that facilitates rotation for one or more internal components of a outdoor appliance.The clutch bearing for one of these outdoor appliances might have to be completely replaced if it shows signs of damage. If the clutch bearing has suffered from general wear and tear over long-term usage or from a direct impact collision with a hard object such as a rock or a curb, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This clutch bearing is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Poulan Pro.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.