Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

2005 Side-By-Side Whirlpool Refrigerator Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Drying Rack
Genuine Speed Queen part
By: Speed Queen
Part Number: D512082P

Flat stationary rack that installs inside the dryer drum for air-drying shoes, hats, and delicate garments without tumbling. Replace if cracked or broken.

Do-It-Yourself Stories from Customers like You No problem just an accessory that I thought would be useful for my dryer.   Barry B. • Bridgeton , NJ • May 25, 2019

Just snap into place.. Read more

More
$83.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Flange Lock Nut
Genuine Mtd part
By: Mtd
Part Number: 712-04063

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Do-It-Yourself Stories from Customers like You Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers   Martin D. • Monroe , MI • February 11, 2022

Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century) Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Potentiometer (Control Input)
Genuine Bosch part
By: Bosch
Part Number: 00624610

This rotary potentiometer converts shaft rotation into an electrical signal the control board can read, providing precise position feedback for user selections. Replace it if inputs become erratic, jump between settings, or the control stops responding.

  • Provides rotary position feedback to the electronic control
  • Enables accurate selection and adjustment of functions or setpoints
  • Wear or damage can cause drifting, dead spots, or incorrect readings
  • Intermittent or no response to input is a common failure symptom
What's included: 1 potentiometer Install notes:
  • Disconnect power before servicing
  • Access the control/console area to reach the component
  • Note shaft orientation and any connector positions; transfer exactly to the new part
  • Handle electronics with ESD care and verify smooth, full-range operation after reassembly

More
$111.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Bolt Carriage
Genuine Mtd part
By: Mtd
Part Number: 710-0451

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

Do-It-Yourself Stories from Customers like You Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers   Martin D. • Monroe , MI • February 11, 2022

Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century) Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Flange Lock Nut
Genuine Mtd part
By: Mtd
Part Number: 712-04064

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Tractor Bell Washer
Genuine Mtd part
By: Mtd
Part Number: 736-0242

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

More
$4.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0599

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Equipment Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0627

Hex screw for lawn mowers, tractors, and snow blowers. Replaces worn, corroded, or missing screws on engines and housings. Identical fit for secure assembly.

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Clip Retaining Pin
Genuine Mtd part
By: Mtd
Part Number: 781-0735

This is a genuine replacement pin clip for select models of chipper-shredder equipment. This pin clip is a specialty part that is responsible for helping to secure the blade bail. If the blade bail cannot be secured, it will be difficult or impossible to operate the machine. This is a safety part that is required for operation and if it is missing or damaged, it needs to be replaced immediately. This pin clip is small and can become worn, corroded, or lost over time. A genuine part like this offers an exact replacement for compatible models. This genuine OEM pin clip is manufactured by MTD and meets exact standards to offer an identical replacement for select chipper/shredder units from the brand, along with those from Troy-Bilt, Yard Machines, Huskee, and Cub Cadet. There are over 150 chippers that will take this part, but it may have different locations depending on the model. Owners should consult the parts diagram for the exact location of this clip prior to replacement. This is sold as an individual item. Additional hardware and parts will require a separate purchase. To replace the pin clip, a screwdriver and pliers will be necessary.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Carriage Head Bolt
Genuine Mtd part
By: Mtd
Part Number: 710-0134

Metal carriage bolt with round head and threaded shank for lawn mowers and snow blowers. Replaces broken or missing hardware during repairs or assembly.

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Handle Star Knob
Genuine Mtd part
By: Mtd
Part Number: 720-04072A

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

More
$7.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Chipper Shredder Roll Pin
Genuine Mtd part
By: Mtd
Part Number: 715-0166

This is a spiral roll pin measuring 0.156 inches in diameter and 1 inch in length, used to secure rotating components on chipper shredders and lawn vacuums. It holds parts in alignment on shafts and prevents slippage during operation. Replace this pin if it is sheared, bent, or missing, which can cause loose or non-functioning attachments.

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Push Cap
Genuine Mtd part
By: Mtd
Part Number: 726-0214

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

More
$10.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Snowblower Shave Plate
Genuine Mtd part
By: Mtd
Part Number: 731-1033

Replace a worn shave plate if snow isn't being gathered properly or the auger housing scrapes pavement. This scraper bar protects your snowblower base.

More
$50.95

IN STOCK
Ships Today Guaranteed
Add to Cart
5/16 Lock Washer
Genuine Mtd part
By: Mtd
Part Number: 936-0119

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

More
$5.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Snowblower Control Bail Handle
Genuine Mtd part
By: Mtd
Part Number: 747-04165-0637

Safety control bail for snowblowers. Mounts on the handle to engage and disengage the drive system. Replace if bent, broken, cracked, or damaged.

More
$14.42

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google