205Idn2ww Parts

Secures internal refrigerator components and keeps assemblies aligned for smooth drawer and panel operation. Replace if cracked, broken, or missing.

Bridge element not heating evenly or failing to connect? This cooktop bridge heating element restores even heat across two burners for large cookware. 1-2 hour install.

Size: 10-24 x 3/8 inch.

This clutch spring cap retains and protects the clutch spring in your washer's drive/clutch assembly, maintaining proper tension. Replacing a worn or missing cap helps the clutch engage smoothly and reduces slipping and noise during spin.

• Secures the clutch spring within the clutch assembly to prevent movement or dislodging
• Maintains correct spring preload for consistent clutch engagement
• Can help reduce clutch slip that appears as weak/no spin, slow spin ramp-up, or intermittent spinning
• Common signs of trouble: rattling or scraping near the drive, burning smell, or a visibly damaged/missing cap

• Unplug the appliance and shut off water before servicing
• Access the clutch per your model's service procedure; removing the gearcase/transmission and clutch may be required
• Carefully relieve spring tension and note the orientation of the spring and cap before removal
• Inspect the spring, clutch lining, and related hardware; replace any worn components during reassembly

This replacement refrigeration tube routes water between the dispenser/valve and internal components to restore reliable water flow and drainage. It's a simple, low-cost part that helps stop leaks and restore proper water delivery. What it does

• Channels water from the inlet valve to internal lines or dispenser components
• Replaces cracked, kinked, or clogged tubing that can cause leaks or reduced flow
• Helps stop visible drips under or inside the refrigerator when the original tube fails
• Works as a direct-fit service part when the OEM tube is damaged

• One replacement tube as shown

• Disconnect power and shut off the water supply before beginning any work
• Inspect fittings and clamps; replace any damaged fasteners to prevent leaks
• Route the tube following original path; avoid sharp bends and pinch points

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

This motor drives the auger that pushes ice from the ice bucket through the dispenser chute when you press the dispenser lever. It converts the motor's rotational force into the turning motion of the auger spiral. Replace this motor if ice is not dispensing, the auger does not spin, or you hear a humming sound without movement when attempting to dispense ice.

The Dispenser Drip Tray is an OEM part for Frigidaire refrigerators. It is located under the water and ice dispenser to catch any drips or spills that occur during use.

A bad dispenser drip tray can be caused by wear and tear, damage, or improper cleaning. When the drip tray becomes faulty, it can result in issues such as water or liquid pooling on the dispenser area or leaking onto the floor.

Symptoms of a bad dispenser drip tray include:

• Water or liquid pooling on the dispenser area
• Leaks or drips from the dispenser onto the floor
• Difficulty in removing or cleaning the tray due to damage

Replace your faulty dispenser drip tray with this genuine OEM Frigidaire part to restore your dispenser area. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replace your refrigerator's light assembly to restore interior illumination. Includes housing, socket, and lens for secure bulb mounting. Verify fit by model.

5 foot. Package of 2.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Fixes lights or controls that won't turn on or off when pressed. This momentary push button switch restores proper circuit function in your refrigerator.

Rubber door bumper cushions refrigerator door closure to reduce noise and protect cabinet finish. Replace if cracked, missing, or worn from repeated use.

Metal rivet fastener permanently secures panels, brackets, and internal components in refrigerators. Replace damaged, missing, or worn rivets to restore fit.

Rubber grommet that cushions components and reduces vibration in your refrigerator. Replace when worn, cracked, or causing noise. Confirm fit with model number.

This flat washer (.250 inch inner diameter x .812 inch outer diameter) is a simple replacement part that helps distribute load from a fastener and protects mating surfaces for reliable appliance operation. What it does:

• Provides a stable bearing surface for screws, bolts or studs to reduce wear on parts
• Helps distribute clamping force to prevent pull-through or deformation of softer materials
• Reduces vibration and movement at the joint when installed correctly
• Missing or damaged washers can lead to loose fasteners, increased vibration or component misalignment

• Disconnect power and water before servicing the appliance
• Replace like-for-like: inner/outer diameters and thickness match the original washer
• Inspect mating hardware and surfaces for damage; replace corroded or deformed fasteners as needed
• Tighten fasteners evenly and avoid over-torquing to prevent washer or component damage