2073St Parts

This genuine Husqvarna screw can be used as a replacement part for chainsaws. The function of a screw for a chainsaw is to attach parts to one another through rotation that pierces through the components. Screws are often subject to replacement in the lifespan of a small engine appliance as they are small components that are easily lost or misplaced without any immediate impact on the appliance; additionally, screws can loosen themselves over time or can suffer damage from general wear and tear or through direct impact upon collision. Screws can also corrode over time, impairing their ability to keep components attached to one another. If this is the case with a screw in a chainsaw, the part should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This is a piston ring replacement that is used for several types of outdoor tools and equipment. The piston ring is used to create a seal between the piston and the cylinder. The seal formed by the piston ring separates the crankcase and the combustion chamber to ensure there is proper compression in the engine. The piston ring can start to wear down or even break after a substantial amount of use. When there is any type of damage to the ring, owners should have it replaced immediately. Problematic piston rings will mean the seal is broken, which will then result in a loss of compression and performance problems with the engine. This genuine OEM piston ring is compatible with more than 150 different models. The ring is made with a 36 chromium-ceramic coating. It is sold individually and is typically used for chainsaws. It could also be used for some pole pruners and trimmers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.

The Poulan assembly bar plate is used in Poulan chainsaws. It sits against the saw's housing and acts as a guard to strengthen the mounting of the bar on the saw. Without a properly functioning bar plate, the plastic that houses the saw will likely be damaged. The bar plate also helps to keep the guide bar lubricated with bar oil, which aids in cutting accuracy. If the bar and chain on the chainsaw are worn through prolonged use, the chain will rub against the bar plate and cause a hole in the metal.The Poulan assembly bar plate is made of durable metal that will last a long time and can be installed with a screwdriver. To install the new bar plate, remove the clutch cover on the chainsaw, and remove the bar and chain assembly. Then replace the bar plate with the new replacement, and put the chainsaw back together. Always make sure to re-tension the chain of the chainsaw after the repair is done.This bar plate is a genuine OEM replacement that is compatible with Poulan assembly chainsaws. It is sold individually.

Carburetors mix fuel with air to ensure the engine gets just the right amount of combustion. It works when idling and when in operation, and a chainsaw carburetor requires an adapter. This reduces vibration to the carb and isolates heat to help keep the carburetor cool. This carb adapter kit will connect the carburetor to the cylinder and uses a gasket on either side that can fail and require replacement. Because plastic can be used for a carb adapter, it can crack and lead to failure. This OEM carb adapter kit is meant for Craftsman, Poulan and Husqvarna chainsaws, and will work in many different models. Replacing it will require the use of a wrench set, socket set, pliers, and screwdriver. As noted, gaskets may also be needed, but this part is sold individually and includes only the chainsaw carb adapter.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

This replacement part is a nut. This part is small but important in various types of equipment. Nuts are able to work with other small parts such as washers and screws to secure equipment components in place.If a nut has become stripped or worn down over time, it is possible that it can no longer perform the function needed. Be sure to wear work gloves when working with small parts such as nuts to prevent injury during the repair. This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.