2475Qfoa Parts

E-ring retainer for lawn tractors and outdoor power equipment. Secures components on 0.500-inch shafts. Replace if missing, bent, or damaged.

Fix snowblower auger not turning or grinding noises with this 80 tooth gear. Common failure part that restores auger rotation. Moderate difficulty repair.

This drive belt is made for use on lawn mowers produced by multiple manufacturers. This belt attached the motor to the blade. This causes the driveshaft to rotate the blade. Because these belts are made of rubber, normal wear tear causes deterioration over time.Deterioration can take the form of cracking, tearing, or stretching of the drive belt. This can cause a complete breakdown of the lawn mower or reduced performance. If the mower is acting sluggish, it may be time to check the belt and replace it if necessary.Before removing and replacing the belt, it is important to drain the fuel tank and remove the spark plugs to ensure safety. Always disengage the blades and wear gloves when replacing the drive belt. After removing the damaged belt, slide the new belt on and reinstall the spark plug before operating the mower.This drive belt is OEM sourced. It is an individual part designed for use with edgers made by Troy-Bilt, Yard-Man, Yard Machines, Cub Cadet, and MTD.

Snowblower won't move forward or backward? The friction wheel assembly works with the friction disc to turn the drive axle and restore self-propulsion.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Replacement mounting screw for gas snowblowers. Secures components and panels together. Order if your original screw is lost, stripped, or missing.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

Replacement fastener for lawn mowers and outdoor power equipment. Secures components and panels. Order a new one if yours is stripped, missing, or damaged.

This replacement part is a gear. Gears are found within engines and work with other parts to allow for everything inside the appliance to run smoothly and effectively during use. The ridges on a gear might become stripped or worn with extended use. If the user hears unusual noises coming from inside the machine, it might be due to a misplaced or damaged gear. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This thrust collar is a structural component that maintains proper spacing in the auger or drive system. Replace if cracked, worn, or missing to restore assembly.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This chute tilt is also called a chute tilt cable guide or a bracket. It is a genuine MTD part and it is a replacement part for various makes and models of snowblowers. On snowblowers, the chute tilt attaches the chute control lever to the chute control cable and guides the cable while the lever moves.If the chute tilt is damaged, the snowblower may not be able to perform its function. Some disassembly is required to make this repair. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug to prevent the engine from powering on. Always wear protective gloves as well. This hub cap is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with equipment manufactured by Cub Cadet, Yard Machines, Yard-Man, Troy-Bilt, Craftsman, Huskee, and MTD.

5-inch chute adapter for gas snowblowers. Connects the discharge chute assembly to direct snow flow. Replace if cracked, broken, or missing for secure fit.

Clutch lock spring for gas snowblowers. Secures the clutch mechanism in position. Replace if spring is stretched, broken, or missing to restore proper function.