279737 Parts

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower. The purpose of a tire is to facilitate the steering of the appliance so an operator can navigate the appliance over a variety of surfaces in order to mow and clip the greenery.The tire of a lawn mower might have to be replaced at some point within the standard lifespan of the appliance if the tread or the internal structure is punctured, torn, ripped, scraped, or eroded beyond repair. If this occurs, the tire should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple repair process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This genuine Husqvarna replacement part is a steering bushing kit for use with lawn tractors and riding lawn mowers. A properly functioning steering bushing is essential for the safe and reliable use of a lawn tractor or riding mower. The steering bushing holds the steering wheel shaft on the steering boot. The steering bushing may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering bushing periodically to spot any wear or damage. This part is an identical replacement for a steering bushing that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. A screwdriver is required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is made of durable material, and includes the bushing and two screws. Please note: original part numbers 1554J, 532155105, 155105 and 532124720 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This flat idler pulley is designed for use with outdoor lawn and garden power equipment, specifically for many different models of lawn tractors and riding mowers. It is compatible with products from brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Troy-Bilt. The flat idler pulley part is crucial for the proper functioning of the lawn mower because it connects to the idler bracket. The purpose of the flat idler pulley is to apply tension to the v-belt. The replacement or repair process of the flat idler pulley will require a moderate amount of savvy. A wrench would be very helpful for the installation process.This flat idler composite pulley is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This flat idler pulley is made out of metal.

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.

This chassis sway bar bracket is a genuine Husqvarna part, sold individually. This chassis sway bar bracket can be used as a replacement part in a lawn mower. The purpose of the chassis sway bar bracket in a lawn mower is to support and bolster the placement of the sway bar of the chassis, so that the sway bar can prevent the lawn mower from tipping over when the appliance is being turned around a corner while in operation.The chassis sway bar bracket might be subject to damage within the course of the operation of the lawn mower; if the chassis sway bar bracket is punctured, torn, cracked, dented, eroded, warped, or otherwise damaged, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without this component firmly in place.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This chassis sway bar bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Jonsered.

This is a replacement left-hand lawnmower lens. This lens covers and protects the light bulb. It is made of durable, clear plastic. However, over time the lens may become damaged, worn, or lost. Commonly, the lens may break when debris is kicked up from the mower, and accidentally hits the lens.Replacement is very simple and easy. Located on the inside of the hood, push the tab of the lens outward. On the exterior of the machine, pull the lens away from the mower. This is all it takes to remove the old, broken lens. To install the new part, simply pop the new lens into position and be sure to push the tab until it locks the lens into place. This process may differ slightly depending on the make and model of the machine. Remember, left-hand and right-hand lenses are different and can only be used on one specific side of the machine. This repair takes just a couple of minutes to complete, with no tools necessary. This genuine OEM replacement lawnmower lens is sold individually. It will be sent directly from the manufacturer. This specific lens can be used with a large number of Husqvarna lawnmowers.

This genuine OEM part is an anti-rotation bracket for lawnmowers. The anti-rotation bracket keeps the blades from rotating incorrectly and allows them to perform their essential functions. Over time, an anti-rotation bracket can deteriorate due to excessive wear and tear. Luckily, replacing this bracket is a relatively easy process.To replace the bracket, remove the mower deck cover and locate the bracket. Pull the bracket out of its place, and reinstall the new bracket by sliding it into its correct position. Reinstall the mower deck cover, and secure it properly. This replacement part is compatible with Husqvarna brand riding lawnmowers.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This replacement part is a clutch intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Clutches engage the blade of the lawn mower so that the user is able to properly cut grass. The clutch connects two different drive shafts so that they can be controlled by the toggle.A new clutch might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.