2863 Parts

This rewind spring, also known as the recoil spring, is an essential part in a small engine. Its job is to rewind the pull rope back into the starter housing and, should there be difficulty in retraction, it is often because the rewind spring has failed. This OEM replacement part works in the engines and starter systems of tillers, pressure washers, lawn mowers, snowblowers, leaf blowers, generators, edgers, and wood chippers. It is suited to brands like Toro, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and others. The primary component is the spring, which is found inside of a metal housing. This part ships individually, and should the housing need to be replaced, it is a separate purchase.

This gasket set is a genuine Midwest Engine part, sold individually. This gasket set can be used as a replacement part in a lawn mower or a snowblower. This gasket set comes with a variety of gaskets in various shapes and sizes, perfect for fitting into many internal mechanisms within the lawn mower or snowblower.If the gaskets have been cracked, punctured, torn, dented, cracked, eroded, or warped beyond functionality, this gasket set should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This gasket set is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, Wheel Horse, Lawn Boy, and Simplicity.

This float bowl is a part associated with the carburetor of a small engine for lawn and garden equipment like lawn tractors. The component is mounted on the side of the carburetor and is a small fuel tank fed by the regular fuel tank. It floats in the fuel, and as the level drops, the float also drops to allow more fuel into the chamber. When it fills, the float bowl moves up and closes the float needle so fuel isn’t released. Some signs that a float bowl may not be working correctly include an engine stalling at high speeds, an engine that keeps flooding, or fuel that is too lean or too rich. Replacement requires turning off the flow of fuel, removing the drain plug, and placing a screwdriver against the pin holding the hinges of the float. This float bowl is a genuine OEM product directly from the manufacturer and comes as an individual item. It is designed for use with Briggs & Stratton, Simplicity, and Cub Cadet lawnmowers and lawn tractors. The float bowl comes with a screw, a washer, and an O-ring and requires basic tools to install.

The air filter cartridge in an engine collects any dirt and debris to protect the engine from damage and provide better performance. The cartridge-style filter offers premium protection with smaller pockets and includes a wire mesh wrap to ensure ultimate filtration. The filter will become clogged with particles and debris over time. Replacement is considered a part of routine maintenance. To install this filter, simply remove the filter cover, remove the old filter, seat the new filter in place, and replace the cover. Be sure to disengage the engine when working on these parts, and always wear gloves. This OEM oval air filter is compatible with select models of engines on lawn and garden equipment manufactured by Briggs & Stratton, as well as Craftsman, Toro, Wheel Horse, Lawn Boy, and Simplicity. It may be used on lawn mowers, wood chippers, and other small engines. This part is sold individually.

This piston ring set is a genuine Midwest Engine part, sold individually. This piston ring set can be used as a replacement part in lawn mowers, snowblowers, and generators. The purpose of the piston ring set is to seal off the gas chamber of the appliance so that there are no significant leaks within or outside of the pistons.Piston rings can suffer damage as a result of general wear and tear from long-term use or from an accident with a hard object. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This piston ring set is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Wheel Horse, Lawn Boy, Simplicity, and MasterCut.

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain consistent temperatures and reduce energy loss. Designed to match the OEM shape and restore proper sealing. What it does:

• Seals the door edge to help keep cold air in and warm air out
• Helps prevent frost buildup and reduces compressor run time when sealing properly
• Can stop drafts and eliminate wet or warm spots on door edges
• Restores the door's original fit when worn, torn, or deformed

• One door gasket

• Designed for a direct replacement; inspect mounting channel and retainer before installing
• Warm the gasket slightly for easier fitting if needed; avoid overheating
• Clean the door frame and remove old adhesive or debris for a proper seal

Size: 8-18ab x 0.5 inch.

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This is a thrust washer that can be used as a replacement for the washers in many models of lawn and garden equipment. The thrust washers are flat and are used to ensure that there is no extra space between pieces connected in the machine. The tight fit can help to reduce vibration and prolong the life of the pieces that are being connected. If the washers are missing or have been damaged, it could result in added vibration and sound from the machine.The metal washers tend to be durable. However, they may still need to be replaced. Over time, they could wear down or become corroded. Other times, they might be lost when working on the machine. The replacement is easy.The thrust washer can work in a range of machines including riding mowers, tillers, and tractors from Craftsman and Husqvarna. Each washer is sold individually. Owners might want to have several of these on-hand. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.