3091879 Parts

This exhaust gasket is located to fit between the exhaust system and the engine exhaust. It is used on many types of lawn and garden equipment. When operating correctly, the gasket will prevent exhaust from leaking. It also has sufficient flex to allow parts to expand when heat is present. The main purpose of a gasket is to prevent leaking. When the gasket is failing, it often leads to exhaust leaking from the joint.Many situations can cause an exhaust gasket to fail. The part can lose flexibility, dry out, or experience cracks. If the gasket chafes, it will lose its heat resistance and begin to dry out. When there is excess engine vibration, the gaskets can also tear. If this occurs, checking the engine mounts is important to ensure they are tightened and fully secure. Replacing the gasket involves removing the engine, taking out the old gasket, and putting a new one in its place.This exhaust gasket is a genuine OEM component sourced directly from the manufacturer. It is sold individually and fits lawnmowers, wood chippers, snowblowers, and generators from Briggs & Stratton, Toro, Cub Cadet, Snapper, MTD, and Simplicity.

This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.

This replacement part is a hex screw. This part is small but important in many different kinds of machinery. Screws secure components within the equipment.Over time, screws can become stripped or corroded, causing them to break or get stuck in place. Excessive vibration during the use could also eventually lead to a screw coming loose and being lost.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This oil seal is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, snowblowers, and wood-chippers. The function of an oil seal is to protect an appliance from accumulating dirt, debris, and gunk in its inner workings as well as to avoid potential oil leaks.If an engine is subject to oil leaks, it could be because of a damaged or malfunctioning oil seal. Diagnosing an oil leak can be tricky, as there are many aspects of the engine that, if compromised, can lead to leakage. This can be tested by running the engine until the leak occurs and then checking to see if the leak originally stems from the oil seal. If it is ascertained that the leak is indeed a result of a damaged oil seal, this genuine OEM oil seal can serve as a replacement part in the case that damage has occurred to the original. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This oil seal is compatible with the following brands: Briggs and Stratton, Simplicity, and Toro.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.