320F Parts

NOTE: For the right side use 318348800

The Hinge Assembly is an OEM part for Frigidaire ranges. This part allows the oven door to open and close smoothly while providing a secure attachment to the range body.

Causes of a bad Hinge Assembly can include wear and tear over time, physical damage from impact or mishandling, or failure of the internal mechanisms due to exposure to high temperatures or debris buildup.

Symptoms of a bad Hinge Assembly include:

• Difficulty opening or closing the oven door
• The door feeling loose or wobbly when opening or closing
• The door failing to stay in the open position
• Excessive noise or grinding sounds when operating the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

This replacement part is a deck cable. This is a genuine replacement part made by MTD. Deck cables are typically made up of a set of wires that are used to activate the blades in different kinds of lawn mowers. A new deck cable might be needed if the cable wires are no longer attached properly. This can be due to normal wear and tear over time. The engine should be completely turned off during this repair and work gloves are recommended when working with parts connected to the engine. This is a genuine OEM replacement part which ensures proper fit. This part is sold individually and is sourced directly from the manufacturer.

This shoulder screw secures moving or fixed appliance components by providing a built-in spacer and pivot point for proper alignment and smooth operation. It restores correct fit where a worn or missing shoulder fastener causes play. What it does:

• Provides a precision spacer and pivot for hinges, drawers, or linkage assemblies
• Holds components at the correct distance to prevent rubbing and binding
• Helps stop wobble, misalignment, rattling, or uneven movement when the original shoulder screw is worn or missing
• Works where a headed screw with an integrated shoulder is required for smooth rotation or exact spacing

• One shoulder screw

• Disconnect power and remove the appliance panel or access covers before replacing hardware
• Handle small parts carefully to avoid dropping them into assemblies; magnetic pickup tool can help
• Install in the original location and tighten securely but avoid overtightening; do not modify the shoulder or thread
• If the screw secures a load-bearing hinge or mechanism, verify alignment and operation after installation

This pressure regulator controls gas flow to the range valve, helping maintain steady burner operation for safe, consistent flames. It replaces a worn or failed regulator to restore proper gas delivery and reliable ignition performance. What it does:

• Regulates incoming gas pressure to the range's control valve for steady burner flames
• Helps correct issues like weak or uneven flames and burners that struggle to light
• Reduces risk of high-pressure surges that can affect burner performance
• Works as a direct replacement when the existing regulator is faulty or leaking

• Turn off the gas supply and power before starting any work; always follow appliance shutoff procedures
• Inspect fittings and seals; use proper thread sealant for gas-rated connections if required by the manufacturer
• After installation, perform a gas leak check and verify correct burner operation and flame appearance

This OEM replacement part is a wheel assembly for riding lawnmowers. The wheel assembly is the entire wheel of a lawnmower including both the tire and rim. Over time, a wheel assembly can become bent from impact or unstable due to continuous wear and tear. If the wheel is no longer rolling smoothly, or seems to be damaged or otherwise bent, it might be time to replace it. Luckily, replacing a wheel assembly is not a difficult job.To replace the wheel assembly, remove the plastic cover on the rim to remove the main bolt holding the wheel to the axel. Remove the individual bolts around the rim, and pull the wheel off the mower. Once removed, place the new assembly in the proper position and push onto the connections holding the wheel in place. Fasten the bolts tightly to secure the wheel. This genuine replacement part is compatible with MTD brand lawnmowers.

This is a simple hex washer screw that can serve a range of purposes in various types of lawn and garden equipment from well-known manufacturers. The piece will help to fasten various pieces of the machine together. It features a washer that is built into the hex screw, which will provide a larger surface area. This can help reduce damage to the connecting pieces and provide a strong connection.The hex washer screw is made from durable metal and can last for a long time. However, it may still need to be replaced if it becomes damaged or if it is lost when making other repairs on the machine. Wear work gloves when making repairs to any machine.The hex washer screw is sold individually. It is a genuine OEM replacement part and can work with many machines from MTD, Craftsman, Troy-Bilt, and Ryobi.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

This replacement part is a hex screw. This is a genuine replacement part made by MTD. This type of screw is commonly found in many types of machinery and appliances. Screws are able to keep certain parts stable and connected so that they are secure during use. A new hex screw might be needed if the current one is visibly damaged in any way or missing. It is not uncommon for screws to become stripped down or lodged in place after years of normal use. If this is the case they should be replaced as soon as possible. If the screw is lodged in place, pliers might be required on top of a screwdriver to complete this repair. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers. The hex screw for one of these small engine outdoor appliances is used as a fastening component.The hex screw in a small engine outdoor appliance might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If this occurs, the hex screw should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

This oval screw is a genuine MTD part, sold individually. An oval screw can be used as a replacement part for outdoor appliances including humidifiers, lawn mowers, snowblowers, tillers, log splitters, and wood chippers.The oval screw for one of these outdoor appliances might be subject to enough damage that could mandate a complete replacement of the part. Additionally, the oval screw could be lost or misplaced, as it is a small component that might not alert the operator of the appliance to its absence immediately. Refer to the manual for detailed instructions.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This oval screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.