39275588892 Parts

Replace cracked or worn dishwasher leveling legs. This foot assembly installs at the base corners to restore proper height adjustment and stability.

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

Secures the dishwasher door to the cabinet and provides a stable pivot point. Replace if your bracket is cracked, broken, or missing to restore alignment.

Replaces a worn, cracked, or leaking hose connector in your dishwasher's water inlet assembly. Restores secure connection to prevent drips at joints.

If your dishwasher won't advance through cycles or gets stuck mid-cycle, this cam switch controls cycle sequencing. Restores proper cycle selection.

This assembly includes the leveling leg adjuster components used to properly level and secure the dishwasher within its cabinet opening. It allows you to raise or lower the appliance so the door aligns correctly and the unit sits stable on uneven floors. Replace this kit if the dishwasher rocks, tilts, or if the existing leveling legs are stripped, broken, or no longer hold their position.

This is an LG dishwasher primary control board assembly. The dishwasher's primary control board assembly contains the control board and the housing that protects the control board.When a dishwasher's control board malfunctions, the part should be replaced as soon as possible. The dishwasher will lose the ability to communicate vital functions that the owner selects on the main interface. Wash and rinse cycles may work on and off without warning, and the display may also be affected. Make sure the dishwasher is unhooked from its main power and water sources before starting any repairs. Slide the dishwasher from its place against the wall and remove the main faceplate and trim. Underneath the trim, the anchoring screws lie around the perimeter of the main control panel. Unthread these screws to remove the main console. With a flathead screwdriver, push the fastening clips that hold the control board assembly in place and remove it. Unhook the wires from the wire harness and prepare to install the new part. Repeat these steps in reverse to install the new control board assembly.The control board assembly is a genuine OEM product sourced directly from LG and is sold individually. This product is compatible with LG and Kenmore appliances.

Connects your dishwasher to the water supply for proper filling. Replace if worn, kinked, or leaking to restore reliable water flow. Verify fit with your model.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

Direct-fit replacement dishwasher case assembly that secures and protects internal components. Replace your cracked, broken, or warped outer housing.

This is a mesh filter assembly that fits inside the dishwasher's sump area to catch food particles and debris during the wash cycle. It prevents large particles from recirculating onto dishes or clogging the drain pump. Replace this filter if your dishes come out dirty, if you notice food residue remaining after a cycle, or if the dishwasher is draining slowly.

This check valve controls one-way water flow to the appliance's dispenser and ice-making system, preventing backflow and helping maintain proper water delivery. Replaces worn or failed valves to restore normal water operation. What it does:

• Allows water to flow in one direction to the dispenser/ice maker while preventing backflow
• Helps stop intermittent dispensing, weak water flow, or water backing into supply lines
• Prevents contamination from reverse flow when the system is idle
• Works as a simple, direct-flow component in the water delivery path

• One check valve

• Turn off water supply and unplug the appliance before beginning work
• Observe original valve orientation; install the replacement in the same direction
• Tighten fittings securely and check all connections for leaks after restoring water

Protective cover for dishwasher. Shields internal components from damage during operation. Replace if cracked, broken, or missing to maintain protection.