Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Replace your washer's 5/16-18 hex nut if the original is stripped, missing, or corroded. Secures components during assembly and maintenance.
Plunger kit includes: Plunger, rivit and nylon insert.
Replaced it: Loosened and lifted the wig wag solenoid used a drill with grindstone and ground off the rivet head, swapped the new part in... BUT... the kit didnt contain the rivet clip so I had to hit the hardware store for a pushnut that fit, hopefully it will stay on. Read more
I ordered a new agitator. I used a Dremel tool to clean up the splines on the agitator drive shaft as best I could as they were pretty well rusted away. I purchased J B Weld with a high psi rating. I slipped a rubber water hose washer over the drive shaft and pushed it down to the bottom of the spline. I liberally coated the splines with the J B Weld. The reason for the hose washer was to help keep the J B Weld from oozing out the bottom of the splines as I lowered the agitator onto the... Read more
Includes 4 rubber washers, 4 metal washers, and 4 screws.
Our Kenmore Series 70 washer no longer spun during the rinse and spin cycle. After scouring the resource on the internet, the lid switch checked out OK, so it boiled down to the wig wag solenoid unit that engages the transmission. The back panel was opened and a check with a multimeter showed one of the solenoids was an open circuit and provided no resistance reading. Removal of the old unit required some finessing with a prying tool and hammer to force it off of the shaft. The new unit... Read more