478778 683615 Parts

M6 flange bolt for lawn and garden equipment engines. Replaces broken, stripped, or missing bolts. Secures engine components and covers.

The carburetor insulator gasket, or intake gasket, sits between the carburetor and the combustion chamber of a gasoline powered engine. This gasket provides a perfect seal that serves two purposes: to keep the fuel/air mix in the carburetor from experiencing too much heat before entering the combustion chamber and to prevent air or fuel from leaking. This particular gasket is used in a variety of small gasoline powered tools, including one- and two-stage snow blowers, log splitters, and other engine applications. This gasket continually experiences air, fuel, and heat extremes during use, and over time, the gasket may become warped or so worn that it becomes ineffective, allowing leaks to develop. When an insulation gasket begins to leak, there are some typical signs, including a very hot engine, stalling, sputtering, lack of power, and unusually high gas consumption. The carburetor must be removed in order to replace this gasket, which sits between the carburetor and intake manifold. When replacing this part, it is best to use a gasket such as this one, which is a genuine OEM replacement part, manufactured to be identical to the original part. This gasket is compatible with machines offered by Craftsman, Cub Cadet, Yard Machines, MTD, and Troy-Built.

Control panel not responding or buttons malfunctioning? This snow thrower control panel restores operation. Moderate DIY repair, about 30-45 minutes.

Secures fuel, oil, or coolant hoses on small engines. Replace if cracked, corroded, or causing leaks. Confirm fit with your engine model number.

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.

Seals the carburetor fuel bowl to maintain proper pressure and fuel delivery. Replace if you notice fuel leaks or engine performance issues.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

Replaces a cracked, hardened, or broken primer bulb on gas-powered engines. Installs on the carburetor to inject fuel for priming before starting.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

Hex screw fastener for lawn mowers and outdoor power equipment. Replace if lost, stripped, or damaged during maintenance. Sold individually.