608-475-0799 Parts

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a thrust washer. It is a genuine replacement part made by MTD. Thrust washers are small but important component, allowing space between certain parts near and around the engine. Washers are typically used with screws and nuts to provide a tight and secure fit for many different parts in the machine.A new thrust washer might be needed if the current one is damaged or missing. Washers can become stripped over time due to friction and other motions inside the machine and need to be replaced. Be sure the engine is turned off before starting a repair. Typically washers are easy to replace and will only require a screwdriver or pliers.This thrust washer is a genuine OEM replacement part and is sourced directly from the manufacturer. Note that it is sold individually.

This ball bearing is made of durable metal and fits in between a spacer and a washer to prevent excessive friction and heat between different parts of lawn and garden equipment. If the bearing retainer or the ball wears out, it can cause problems with turning the wheel on a lawnmower or other equipment. The balls take the load and spin to distribute weight evenly while avoiding friction so the tool can run smoothly.Ball bearings experience wear constantly when a machine is being used, so they can start to wear out or experience problems. The heat, vibration, pressure, and friction will start to wear them down. Because of that, ball bearings often need maintenance or replacement. To replace the ball bearings, remove the wheels and the height adjuster, if present. Take out the old bearing holders and remove the bearings. Put the new ones in and reassemble the machine.This is an authentic OEM replacement ball bearing directly sourced from the manufacturer. It is sold as an individual item. The ball bearing is designed for edgers, lawn tractors, trimmers, and lawnmowers manufactured by Yard-Man, Craftsman, MTD, and Yard Machines.

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to serve as a fastening component that is put between one or more components in order to keep them apart from one another, which serves the function of reducing friction between those components while the appliance is in use.The spacer in a lawn mower is a small component that can be very easily lost or misplaced during typical use of the appliance; if the spacer is lost, the user of the appliance might not necessarily notice its absence right away, as its absence will not alter the functionality of the appliance. But if the spacer is missing, it should be replaced as soon as possible in order to guarantee the safekeeping of the components into which the spacer is integrated.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Yard Man.

The muffler on lawnmowers prevents neighbors from becoming overly upset when the grass is cut early in the morning. When the engine starts on the lawnmower, the combustion releases burnt gas, making a very loud noise. The muffler dissipates the noise to make the lawnmower run more quietly. Over time, heat from the exhaust and constant exposure to the elements may cause the muffler to rust and possibly have holes that increase the noise. If this happens, the muffler should be removed and replaced to keep the noise to a minimum. Wait for the engine to cool so that the muffler is cool to the touch. Wear work gloves and have a socket set and adjustable wrench available. Remove the muffler screws and set them aside to use on the new muffler. Remove the damaged muffler from the mounting bracket. Install the new muffler on the mounting bracket using the mounting screws from the old muffler. Tighten the screws and start the lawnmower to ensure the muffler is installed correctly. This muffler is a silver metal part that is sold as one unit. It does not come with attachment screws. It is designed for use on lawn mowers manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Husky.

This muffler is a genuine OEM replacement part sourced directly from the manufacturer for use on lawn and garden equipment. It reduces the noise coming from the exhaust. Being a metal part exposed to the elements, it is not uncommon for mufflers to corrode over time and need replacement. As a lawnmower part, the muffler may sustain damage from debris in the yard while mowing. In either case, the muffler should be removed and replaced to keep the noise level to a minimum.The engine and damaged muffler should be cool to the touch before repairing the lawnmower. Wear work gloves and safety goggles. Remove the spark plug from the lawnmower for extra safety. Locate the bolts securing the muffler to the lawnmower and loosen them to remove the muffler. Dispose of the old muffler and align the new muffler with the bolts. Attach the new muffler and tighten the nuts. Put the spark plug back in the lawnmower. This muffler is a high-quality metal part that is individually sold. It does not come with hardware. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, and Husky.