6651317 Parts

This interconnect board links the range/oven control console to the main electronics, restoring signal and power routing so the console and control functions communicate correctly. Designed as a direct replacement circuit connector. What it does:

• Routes signals and power between the user control console and the main control board
• Restores communication for touchpad/controls and display functions
• Can resolve symptoms like an unresponsive control panel, blank or flickering display, or failure to start cooking cycles
• Helps correct intermittent electronic behavior caused by loose or damaged connector circuitry

• Disconnect power at the breaker or unplug the appliance before beginning work
• Handle the board by the edges and avoid static discharge; use anti-static precautions if available
• Verify connector orientation and fully seat all ribbon cables and wire harnesses during reassembly

The Gasket is an OEM part for Whirlpool dishwashers. This gasket seals the gap between the dishwasher door and the main tub, preventing water from leaking out during the wash cycle. It ensures a watertight seal that helps maintain the efficiency and performance of the dishwasher.

 Over time, the gasket can deteriorate due to regular use, exposure to heat, and contact with detergents. A faulty gasket can lead to water leaks, which may cause damage to surrounding cabinetry and flooring.

Symptoms of a bad dishwasher gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks or tears in the gasket
• The dishwasher door not closing properly
• Increased noise levels during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spray Arm is an OEM replacement part for Whirlpool dishwashers. It is a component responsible for distributing water through an array of small spray openings during the cleaning cycle. The spray arm rotates and evenly disperses water and spray over the dishes.

Causes of a bad spray arm can include mineral scale buildup obstructing water flow through the spray holes, damage or cracking weakening the plastic construction, or worn bearings preventing proper rotation.

Symptoms of a bad spray arm include:

• Inadequate or uneven cleaning even on lightly soiled dishes
• Dirt and food particles left behind after washing
• Clogged or inoperable spray holes.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Color: Black - Part has been changed to an Access Panel Kit - The toe panel is no longer used.

This is a durable pump and motor assembly for dishwashers. The purpose of the pump and motor is to pump water that goes through the spray arms when the dishwasher moves through a cycle. If the pump and motor assembly isn't working correctly, it could lead to dishes that are dirty after a cycle is complete. Other signs of a bad pump and motor include pooling water after a cycle and whining noises.If the pump and motor assembly need to be replaced, make sure the dishwasher is unplugged. Use a pair of work gloves to protect the hands throughout the process. Close the water supply valve and disconnect the drain line. Replacing the pump and motor assembly may require tilting the dishwasher on its side to disassemble the components that are in the way of the replacement. Once the pump and motor have been removed, install the new parts and reassemble the dishwasher before use.Created for use with dishwashers by KitchenAid, Kenmore, and Whirlpool, this pump and motor assembly is a genuine OEM replacement part. It is sold as a single part. This component is directly sourced from the manufacturer.

Restore smooth rack movement. This lower dishrack roller assembly mounts to the rack and provides the rolling support that lets the rack slide in and out easily, helping prevent binding, dragging, or popping off the tracks. What it does:

• Attaches to the lower rack to support and guide smooth rolling on the rails
• Replaces a cracked, worn, or missing wheel/bracket assembly
• Helps when the lower rack is hard to slide, rides unevenly, or falls off the track
• Reduces scraping or grinding sounds from a dragging rack

• 1 lower dishrack roller assembly

• Disconnect power before servicing for safety
• Pull out the lower rack and release the old assembly from its clip/tabs
• Align and snap the new assembly onto the same rack tines until it locks securely
• The rack rolls smoothly before returning the appliance to service

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation

This disk valve diverter directs wash water flow between spray arms and wash zones to restore proper circulation and cleaning performance. It replaces a worn or damaged diverter to help return consistent spray pressure and distribution. What it does:

• Routes pump water to the correct spray arm or wash zone during the wash cycle
• Helps maintain even spray pressure for effective cleaning
• Worn or broken diverter can cause poor cleaning, reduced water to a spray arm, or unusual pump noise
• Prevents bypass flow that can reduce wash performance

• One disk valve diverter as shown

• Disconnect power to the appliance and shut off the water supply before starting
• Access may require removing the tub access panel or disassembling spray arm/tub components
• Inspect surrounding seals and gaskets; replace any damaged parts to prevent leaks
• After installation, run a short cycle and check for proper water routing and leaks

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Also order air vent seal