665147 Parts

This clip secures the dishwasher dispenser fill hose in place to prevent leaks and ensure proper routing during wash cycles. A worn or missing clip can allow the hose to shift, leading to leaks, poor dispensing, or error codes.

• Holds the dispenser hose securely to its mounting point
• Helps prevent leaks, kinks, and misrouting of the hose
• Restores stable hose positioning for reliable wash performance

• Disconnect power and shut off water supply before service
• Remove the outer door panel to access the dispenser area
• Note hose routing and clip orientation before removal
• Ensure the hose is fully seated and the clip is fully engaged to its bracket

The Pump & Motor unit is an OEM replacement part for Whirlpool dishwasher models. This unit works together to recirculate water, chemically treated, throughout the wash chamber during cycles.

Symptoms of a bad pump & motor unit include:

• Incomplete or inadequate water coverage of dishes
• Draining issues after cycles  
• Strange noises emanating from the unit
• Soiled dishes despite running cycles

Causes can be mineral buildup on motor components over time, cracked pump housings allowing leaks, or failure of motor windings. 

This OEM replacement is compatible with select Whirlpool, Maytag, KitchenAid, Jenn-Air and Kenmore dishwashers.

Size: 8-32 x 1/2 inch.

This mount plate is a stamped metal bracket that secures a component inside the appliance, helping keep parts aligned and reducing movement. Replace a damaged or bent plate to restore a stable, secure installation. What it does:

• Provides a stable mounting point for internal components to prevent shifting or sagging
• Helps reduce vibration and rattling caused by loose or worn mounting surfaces
• Keeps electrical and mechanical parts properly aligned for reliable operation
• Common symptom: visible looseness, noise, or component movement during use

• Disconnect power and unplug the appliance before starting any repair
• Verify the plate orientation and mounting hole alignment with your appliance's service diagram
• Use the original screws or OEM-specified fasteners and tighten securely but do not overtighten

This slide-ram is a replacement drawer slide component that restores smooth opening and reliable support for a freezer or refrigerator drawer. It helps the drawer track properly and reduces binding or sticking during use. What it does:

• Guides and supports the drawer as it opens and closes
• Replaces worn, cracked, or damaged slide hardware that causes sticking or uneven movement
• Helps realign a sagging or mis-tracking drawer for smoother operation
• Works as a direct-fit replacement where specified by the OEM

• Basic hand tools required; disconnect power and empty the drawer before starting
• Handle sharp edges carefully and keep small fasteners secure during reassembly
• If clips or screws are corroded or damaged, replace them with OEM-recommended fasteners

Bag carrier handle assembly that secures a disposable dust bag to the vacuum housing, letting you remove and replace bags cleanly and safely. Restores proper bag seating and handling for bagged vacuum units. What it does:

• Holds the dust bag in place so debris is directed into the bag, not the housing
• Provides a grip for removing and carrying full bags without tearing or spillage
• Replaces a cracked, broken, loose, or missing handle that prevents proper bag seating
• Helps stop bag detachment or leaks caused by an unstable carrier

• Always unplug the appliance before servicing.
• Remove the old bag and carrier, noting orientation; the carrier may snap into place or be secured with small screws.
• Verify the new carrier seats and latches fully before installing a new bag.

This small conical washer is used in select washer assemblies to maintain clamp force under vibration. It helps keep fasteners tight and components properly aligned for reliable wash and spin performance. What it does:

• Provides spring-like tension under a screw or bolt to maintain clamp load
• Helps prevent fasteners from loosening due to vibration
• Supports proper alignment and secure fit of mating parts
• Worn or missing washers can lead to rattling, looseness, or intermittent operation

• 1 cone washer

• Disconnect power and, if applicable, turn off water supply before servicing
• Access the relevant assembly per your model's service information
• Note the washer's original orientation and match it during reassembly
• Tighten hardware securely without over-torquing; test and recheck for security

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

The Cntrl-Elec is an OEM component specifically designed for Whirlpool dishwashers. This electronic control board regulates critical operations such as cycle selection, temperature settings, wash and rinse functions.

Symptoms of a bad control board include:

• Dishwasher does not start or stops mid-cycle
• Improper heating, no hot water or intermittent hot water
• Failure to drain or dry dishes completely
• Fault codes or error messages on display

Causes can be water inside the unit, defective switches over time or electrical issues. Stray voltage or power surges may cause circuit failures.

This OEM Whirlpool part is compatible with KitchenAid, Jenn-Air, Admiral, Crosley, Amana, and some Kenmore models.

The Main Control Board is an OEM component specifically designed for Whirlpool dishwashers. It is the central processing unit that monitors and controls all dishwasher functions.  

The control board plays a vital role in operating wash cycles, monitoring temperatures, distributing water, and activating other components like the motor, heater, and drain pump.

Causes of a bad control board can include failure from liquid intrusion or power surges over time. Electronic components may degrade and stop communicating properly.

Symptoms of a bad control board include:

• Dishwasher not starting or running cycles correctly
• Error codes appearing on the display  
• Inability to change settings or programs
• Other components like the motor not reacting to commands

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Replacement stringer bolt that secures the appliance's stringer or support rail to the cabinet frame, restoring panel alignment and preventing movement. Use when the original bolt is missing, loose, or damaged. What it does:

• Secures the stringer/support rail to the appliance frame so panels and assemblies stay aligned.
• Helps prevent cabinet or panel movement that can cause rattling or vibration during operation.
• Restores proper alignment when a loose or missing bolt causes misaligned panels or binding doors.
• Simple, direct replacement for a corroded, stripped, or lost fastener.

• Disconnect power before working on the appliance and remove any panels.
• Use the correct-size socket or wrench; hand-tighten, then snug—do not overtighten to avoid stripping threads.
• Inspect mating threads and replace the bolt if heads or threads are damaged; for the correct fastener location.

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This latch plate secures the appliance door to the cabinet, providing the positive engagement needed for proper door closure and operation. It helps restore a door that won't stay closed or won't trigger door switches. What it does:

• Acts as the door strike that the latch engages to hold the door shut
• Ensures the door closes firmly so door switches can register a closed state
• Can stop issues like a loose or misaligned door, or a door that won't remain closed
• Restores proper alignment and engagement without replacing the full latch assembly

• Disconnect power (and gas if applicable) before servicing
• Remove the door or access panel to reach the latch area
• Inspect related latch components and alignment; replace only the damaged part
• Use basic hand tools; tighten fasteners securely but avoid overtightening

This drive chain connects a washer's motor/transmission to the agitator or drum, transferring rotational motion so the wash basket spins and agitates properly. Replaces a worn or broken chain to restore normal drive function. What it does:

• Transfers motor torque to the transmission/agitator so the tub spins and agitates
• Commonly replaced when the washer won't agitate or spin despite motor running
• Replaces stretched, rusted, or broken chain that causes slipping or unusual noise
• Works as a direct mechanical link—no electrical components involved

• Install with the appliance unplugged and water supply turned off; follow OEM service manual for alignment and tension
• May require partial disassembly of cabinet, pulley, or transmission; have basic hand tools ready
• Inspect sprockets, tensioners, and related components and replace if excessively worn

This is a replacement fastening nut used to secure appliance components and mounting hardware. It restores a solid connection so panels, brackets, or assemblies stay properly attached and function safely. What it does:

• Secures threaded shafts, studs, or bolts to hold parts in place
• Prevents loosening that can cause rattling, misalignment, or detached panels
• Restores proper mounting for brackets, trim pieces, and small assemblies
• Works wherever the correct threaded nut is required for a secure fit

• Turn off power to the appliance and unplug before servicing
• Hand-start threads to avoid cross-threading, then tighten with appropriate hand tool