722T1bc Parts

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

Connects your dishwasher to the water supply for proper filling. Replace if worn, kinked, or leaking to restore reliable water flow. Verify fit with your model.

This is a thermistor assembly that monitors the water temperature inside the dishwasher during wash and rinse cycles. It sends temperature readings to the control board so the machine can heat water to the correct level. Replace this sensor if dishes come out poorly cleaned, the cycle runs too long, or the dishwasher displays a temperature-related error code.

Fix a dishwasher with no display, partial numbers showing, or unresponsive buttons. This control panel restores cycle selection and monitoring functions.

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely

This is the main electronic control board assembly for a dishwasher. It manages the wash cycles, water fill, drainage, and other key functions by sending signals to the various components. Replace this board if the dishwasher fails to start, stops mid-cycle, displays error codes, or if buttons on the control panel become unresponsive.

This is a small roller that guides the door cable on the left side of the dishwasher. It helps control the tension and movement of the door cable, allowing the dishwasher door to open and close smoothly and stay in position when lowered. Replace this roller if the door drops open too quickly, feels unbalanced, or if you hear grinding or scraping noises when opening or closing the door.

This upper dishwasher rack replaces a worn or damaged rack to restore safe, stable support for dishes and glassware during wash cycles. It provides proper spacing and alignment so items clean evenly and stay protected. What it does

• Holds plates, cups and lightweight dishware in the dishwasher's upper loading area
• Restores missing or broken tines and support that can cause items to shift or tip
• Helps maintain correct spray coverage for consistent cleaning results
• Reduces risk of chipping or scratching by keeping items separated

• One upper dishwasher rack

• Designed for drop-in replacement; remove lower rack and slide out upper rack guides as needed
• Inspect and replace any damaged rollers or rail clips at the same time for smooth operation
• Disconnect power and follow manufacturer guidelines when accessing internal components

Replaces damaged, bent, or broken upper dishwasher rack. Holds dishes, cups, and small items securely for organized loading and better spray access.

Direct-fit replacement dishwasher case assembly that secures and protects internal components. Replace your cracked, broken, or warped outer housing.

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This is a third level rack assembly that sits at the top of the dishwasher interior, above the upper rack. It provides additional loading space for flat items like utensils, small cups, and lids, freeing up room in the lower racks. Replace this rack if the tines are bent or broken, the slides are damaged, or the rack no longer glides smoothly in and out of the dishwasher.

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear. Replace a worn roller to restore stable drum rotation and quieter operation. What it does:

• Supports the dryer drum so it spins evenly during drying cycles
• Reduces scraping, grinding or thumping noises caused by worn rollers
• Helps prevent excessive drum wobble that can stress the motor and belt
• Restores proper drum alignment to improve overall operation

• Disconnect power before starting any repair to avoid shock or injury
• Access usually requires removing the dryer cabinet or front panel — follow your model's service guide
• Inspect the belt and adjacent rollers for wear and replace if needed