7304Aae Parts

Muffler assembly for gas leaf blowers and line trimmers. Includes muffler and mounting components. Replace if cracked, rusted, or damaged. Installs on engine.

Throttle control cable for edgers and powered lawn equipment. Replaces worn, frayed, or broken cables that prevent proper engine speed adjustment.

Throttle cable for front-tine tillers. Controls engine speed from the handlebar. Replace if frayed, kinked, broken, or no longer moves smoothly.

Replacement edger blade for cutting grass and weeds along concrete and landscape edges. Replace when blade becomes dull, damaged, or worn from ground contact.

Fix reduced engine performance and rough running on your leaf blower or trimmer. This replacement air filter prevents dust from entering the engine.

This is a replacement pan-head, locking screw used to secure the top bracket on compatible Frigidaire appliances. It provides a reliable fastener that helps keep the top bracket and panels held firmly in place. What it does:

• Secures the top bracket to the cabinet or chassis to prevent bracket movement or rattling
• Restores proper alignment of top panels and trim that may be loose or sagging
• Uses a locking feature to resist loosening from vibration
• Pan head design provides a low-profile, finished appearance once installed

• One screw as shown

• Use the matching #8-32 driver or bit and tighten until snug; avoid over-torquing to prevent stripping
• Turn off power and remove panels as needed before accessing the bracket area
• Replace only with the same size and thread type to ensure secure fit
• Replace all related screws for even support

Dryer not heating? This gas burner assembly ignites fuel to generate heat. Common fix for no heat issues in gas dryers. Moderate DIY repair.

Replace your dryer's timer dial if it's cracked, broken, or won't turn properly. This control dial mounts on the timer shaft to set drying cycles.

Replacement screw for outdoor power equipment including lawn tractors, tillers, leaf blowers, and trimmers. Replace stripped, missing, or damaged screws.

Replacement muffler screw that secures the muffler cover in place on lawn equipment. Needed when original screw is stripped, missing, or damaged.

Mounting screw for lawn tractors and tillers. Secures components and housings. Replace if stripped, rusted, missing, or damaged during maintenance.

With small gasoline-powered tools that require control panels, this hex screw attaches the panel to the handles of the tools. Machined to be durable, important screws such as these take a real beating. In their locations at critical points on the handle, the hex screws are considered "wear items," and thus periodically, they must be replaced. The control panel itself is often a location of extreme forces, jostling, and abrupt movement in unpredictable directions. The constant movement, with sheet metal rubbing against the hex screws from every direction, make wear inevitable. The manufacturers recommend that spare screws of this type be kept on hand if the heavy use of the equipment is expected. Among the gasoline-powered tools that use these screws are snowblowers, yard tractors, mowers, tiller, chippers, shredders, and other tools requiring hand-maneuvered levers. These screws are compatible with a number of equipment brands and manufacturers, including MTD, Ryobi, Poulan, Yard-Man, Bolens, Troy-Bilt, and Yard Machines.

Bell washer for lawn mowers and outdoor power equipment. Replaces worn, missing, or damaged washers. Installs on drive assemblies and shafts.

Shoulder screw for lawn mowers and outdoor power equipment. Replaces worn, stripped, or missing screws that secure components during operation.

This is a genuine replacement flywheel spacer that is used on select outdoor lawn and garden engines. The flywheel spacer is used to connect the flywheel in line trimmers and provide adequate spacing so that the line can rotate properly to provide the trimming required. This spacer is made of durable metal but it can be damaged or become worn over time. If it is not functioning properly, the part will need to be replaced so that the unit is safe to use. This part can provide an exact fit for compatible models. This genuine OEM flywheel spacer is manufactured by MTD. It can be used in units from the brand, as well as compatible units from Troy-Bilt, Cub Cadet, and Craftsman. The spacer is made of durable metal and sold individually. Other parts will require an additional purchase. The line trimmer should be disconnected from power and the spark plug should be disconnected before doing any repairs. Wear gloves for hand protection whenever working on internal components on line trimmers and other outdoor power equipment.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.