7690610 Parts

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

Carriage bolts are flat-tipped with round heads, and their function in small engine appliances is to fasten together components and to secure that connection with a nut. There are various reasons that a carriage bolt might have to be removed and replaced, among them misplacement of the small, easily lost part. Other reasons to replace a carriage bolt could include damage or erosion that prevents the bolt from attaching the materials to one another effectively. If a carriage bolt is subject to this kind of damage, it should be replaced before using the small engine appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This genuine MTD carriage bolt can be used as a replacement part for several different kinds of appliances that require small engines, including lawnmowers, snowblowers, wood-chippers, tillers, string trimmers, leaf blowers, and edgers. The OEM carriage bolt is compatible with the following brands: Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. This part is sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This part is a replacement nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or lost nut in outdoor power equipment.Nuts help to secure different equipment components together properly. They will need to be replaced if corroded, stripped, lost, or unable to properly fasten together parts. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this nut, the appropriate owner's manual and equipment diagrams should be referred to. This nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

A cotter pin is a standard piece of hardware typically used on lawn and garden equipment as a method of securing something to an axle or round shaft. These pins are thin and, although they are durable, they can rust or become damaged over time. In some instances, they can break off or become lost in the process of other repairs. A replacement with the right size and style of cotter pin will ensure that equipment is in working order at all times. This genuine OEM cotter pin replacement can be used with select lawn and garden equipment from MTD, Huskee, Yard Man, Yard Machines, Troy-Bilt, Bolens, Cub Cadet, and Murray. It can be used on lawn tractors, log splitters, chipper/shredder units, and snowblowers. There are more than 150 compatible units, so owners should consult their parts diagram for application(s) of this pin. Note that this pin may have multiple applications on a single machine. This cotter pin is sold individually and may require needle nose pliers to replace.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

This replacement part is an extension spring intended for use in lawn equipment. This is a genuine replacement part made by MTD. Extension springs are responsible for applying tension to the guard which then retracts the spring. This is just one part in lawn mowers that allow the entire machine to operate properly and efficiently.A new extension spring might be needed if the current one is damaged or broken in any way such as being dented or snapped. The user might be able to tell when the extension spring is malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This is a rubber grommet that is designed as a replacement for select lawn tractors and mowers. The rubber grommet is a part that is designed to protect parts from abrasion and provide passage for various elements in the mower. It will create a strong and durable seal in the machine but due to constant wear, heat, and vibrations, the rubber could become worn or cracked over time. The grommet could also be lost or misplaced in the process of other repairs. In either case, a replacement with this OEM part will resolve the issue. This genuine OEM rubber grommet is sold individually. Owners should disconnect the power to the tractor and allow the engine to cool completely before replacing this part. Wear gloves for hand safety, as well. The part is manufactured to exact standards by MTD and can be used in machines from Yard Machines, Bolens, MTD, Troy-Bilt, Yard Man, Cub Cadet, and Husky. Owners should refer to the parts diagram for exact placement of this grommet. Installation will require a screwdriver and wrench set.

This is a replacement shave plate for use with snowblowers. The plate attaches to the bottom of the auger housing on the machine and provides protection for the auger and the housing. If it is broken or not functioning properly, debris could damage these other parts of the snowblower. This would then require a larger repair.The shave plate is made from metal and is durable. However, the nature of the plate is to provide protection, which means it will become dinged and damaged over time. It could become bent if the user hits a large rock or chunk of ice. If there is damage to the snowblower shave plate, the user should be sure to replace it before using the machine again.This snowblower shave plate is compatible with models from Craftsman, MTD, White Outdoor, Ranch King, Yard-Man, and Yard Machines. The plate is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.