76929002000 Parts

This part is a spindle shaft that is used on lawn tractors. A spindle shaft is a rotating component that is attached to the blade, which only rotates when the machine is in action.A new spindle shaft may be needed if the original has become worn or corroded due to normal wear and tear over a period of time. If the spindle shaft is cracked, broken, or damaged in any way, it will need to be replaced. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This spindle shaft is a genuine MTD part. It is sold individually. This particular spindle shaft is compatible with lawn tractors that are manufactured by MTD, Yard-Man, Troy-Bilt, Cub Cadet, Husky, and Yard Machines.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

High blades are used on lawnmowers and perform well in all conditions. They are curved on the ends more deeply than low blades, which creates more suction to circulate the cut grass and discharge the clippings more efficiently. High blades work well in deep or wet grass and are less likely to cause clogging. High blades can wear out or become damaged with time and will require replacement.To replace a high blade for a lawnmower, find out what corresponding sized wrench is required to loosen the bolts affixing the current blade. Ensure that the lawn tractor is completely cool before starting, and always wear gloves when working with lawn tractor blades. Remove the old blade, and clean up around the area where the new blade goes before installing and securing it tightly.The high blade is an authentic OEM part made by the MTD manufacturer. The blade is 23.5 inches and is only compatible with the MTD brand lawn tractors with the matching star pattern. It is made of durable, high-quality metal. This is a single lawnmower blade. If two lawnmower blades are required, they must be ordered separately.

This is a two in one blade that can be used as a lift blade to bag clippings, as well as a side discharge for clippings. It is time to consider replacing this blade when there are uneven or even missed areas of cutting or bagging when using the mower. It may be that the blade has been dulled by prolonged use or bent or damaged by striking rocks and dense roots. Either way, replacing the blade is a relatively easy repair to make and should be considered a part of routine maintenance. The repair requires the use of the proper tools, including wrenches and sockets. An appropriate flange bolt may need to be purchased as well if the original has been damaged or worn. "This OEM replacement cutting blade works with more than 150 types of tractors and mowers made by Craftsman, Yard Machines, Yard-Man, MTD, and Troy Bilt. This ships singly and is a high-quality blade made of durable materials.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This fuel tank assembly is a genuine Husqvarna part, sold individually. This fuel tank assembly can be used as a replacement part for a lawnmower. The fuel tank assembly comes with the fuel tank as well as all of the necessary fastening components required to install the fuel tank or to replace a broken fuel tank. This fuel tank stores fuel while connecting to the fuel line so that the fuel can be fed into the engine.The fuel tank might have to be replaced if it is leaking or cannot store fuel effectively. This could occur as a result of puncturing, tearing, or erosion to the material of the fuel tank. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Always remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This Fuel tank assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Huskee, Bolens, Yard Man, and Yard Machines.

This part is a replacement muffler. This part can be used to replace a broken or defective muffler in lawn tractorsThe muffler ensures that there isn't excessive noise emitted by the engine's exhaust during use. If the user notices the equipment is very noisy to operate, the muffler may be broken and will require replacement with a genuine OEM part. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning any repairs.As an authentic replacement part from MTD, this muffler is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and some other brands. This is a genuine OEM part made of high-quality, durable materials and is sold individually.

This is a replacement fuel cap with a tether that works for many models of lawn tractors. The fuel cap is used to seal the fuel tank. If the cap is damaged, it could mean that there is a chance of debris getting into the fuel tank. A damaged fuel cap should be replaced for safety.The cap is made from durable plastic, but it may need to be replaced occasionally. If the threads are damaged and it is no longer fitting properly or if it is cracked, the cap should be replaced. In some cases, the fuel cap might be lost. Do not operate the tractor without the fuel cap. The cap can be replaced easily as it simply screws onto place on the fuel tank.This cap works with models of lawn tractors from MTD, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Bolens. This genuine OEM replacement part is sold individually.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

This replacement part is a control assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This specific control assembly is typically found in snow blowers. This part is situated towards the top of the appliance and assist the user in controlling the snowblower. This part is able to adjust the settings as well as the power during use. A new control assembly might be needed if the current one is damaged or broken in any way. Because this is a heavily used part it is not unusual for the area to become stripped or worn down after years of normal wear and tear. Be sure the appliance is completely powered down before starting to repair or replace this part. Refer to the specific user manual for more details on how to replace this part. This control assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This electromechanical SPDT 24V relay switches a single circuit between two outputs to control motors, valves, or heaters. It provides the reliable on/off switching appliances need to run specific components when commanded. What it does:

• Energizes a 24V coil to open or close the common contact to the normally open or normally closed contact
• Controls motors, pumps, fans, or heating elements when the appliance control board sends a 24V signal
• Common replacement when an appliance component does not start or cycles incorrectly due to a failed relay
• Designed for panel or chassis mounting in appliance control systems

• Turn off and unplug the appliance before servicing to avoid shock or injury.
• Verify connector orientation and terminal fit; match wire positions exactly when replacing.
• If soldering or crimping, use appropriate tools and make secure connections to prevent intermittent faults.