76960820 Parts

This replacement part is a shaft assembly lift. It attaches to the lift link arms. This allows the deck of the machine to be raised or lowered according to the desired settings. If the part has become damaged from impact or because of general wear and tear and can no longer adjust the deck of the lawn mower, it should be replaced. Be sure the engine is in the stationary position and is powered down before attempting to replace this part.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This tap hex screw is a genuine MTD part, sold individually. A tap hex screw can be used as a replacement part for outdoor appliances including lawn mowers, tillers, and edgers. This is a small fastener.The tap hex screw for one of these outdoor appliances might be subject to damage or to a loss or misplacement that can necessitate the full replacement of the screw. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tap hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

This screw is a genuine Midwest Engine replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to link materials together by piercing into the materials and then rotating it until the materials are firmly clasped together.It is likely that a screw will have to be replaced at some point in the lifespan of an appliance due to simply losing or misplacing the screw. If the materials that are generally supposed to be held together seem to be loosening or have come apart, it is likely that the screw has either fallen out or has undergone damage that has warped it. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: MTD, Cub Cadet, Troy-Bilt, and Yard Machines. This part sold individually.

This replacement part is an auger axle. It is a genuine replacement part made by MTD. The auger axle typically assists the wheels in rotating in the proper direction during use. A new auger axle might be needed if the user notices that the wheels in the appliances are not rotating smoothly or at all. It is possible that after a long time of use the axle parts can become worn down or stripped due to normal wear and tear. If this is the case it is recommended that they be replaced as soon as possible. This axle auger is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part. Be sure to purchase the correct amount as many machines require more than one to operate correctly and run properly.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

This part is a replacement pin. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or broken pin in various models of small engine outdoor power equipment. Pins help to hold together different parts of the equipment whilst also being quickly and easily removable by the user for quick and efficient access. Pins can become corroded, broken, misplaced, or may be rendered otherwise defective and thus a replacement pin will be needed. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this pin, the appropriate owner's manual and equipment diagrams should be referred to. This pin is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractors and other small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This pin is a type of spring pin that keeps parts from sliding axially along a shaft. The spiral pin allows more flexibility and is better suited for heavy-duty applications. It keeps the components in place to actually process the snow coming through the snow blower. This product is a durable metal sheet, and replacement will be necessary when warping or breakage occur. This will be noticed if the axle spins without producing any kind of processing outcome. Snow buildup where a snow blower is being used is a good indication of this part needing attention. Replacement ranges in difficulty depending on the type of hole the pin is located in. See owner's manual for specific instructions on replacement. In most cases, a pair of pliers are needed for replacement. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man snow blowers. It is also an OEM part sourced directly from the manufacturer, and it is sold individually.

This replacement part is a gear. Gears are found within engines and work with other parts to allow for everything inside the appliance to run smoothly and effectively during use. The ridges on a gear might become stripped or worn with extended use. If the user hears unusual noises coming from inside the machine, it might be due to a misplaced or damaged gear. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.