76972110 Parts

This part is a replacement friction wheel assembly. It is intended to replace a defective or broken friction wheel assembly in snow blowers.The friction wheel works with the friction disc to turn the drive wheel axle. This part is essential to proper equipment functionality but may be damaged with regular equipment usage. Before beginning this repair job, disconnect spark plug. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before beginning. This friction wheel assembly is a genuine MTD OEM part made of durable materials and is sold individually. It is suitable for use with snow blower models that have been manufactured by MTD, Craftsman, Troy-Bilt, and some other brands.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

This is a genuine replacement belt designed to work with multiple types of snowblowers. It is sometimes called a wheel drive belt or a V-belt. The belt is installed on pulleys that allow the transfer of motive power from the engine to the wheels and the auger, allowing the snowblower to move forward, as well as break up and throw snow. These belts are made from high-quality rubber, but they will suffer from wear and tear over time. Through normal use, exposure to extreme temperatures, and over time, the rubber can crack, and eventually, the belt will break. If the snowblower's wheels will not turn, it is most likely that the belt needs to be replaced. Replacing the belt is simple, but will require accessing the pulleys. Remove the old belt and then install the new one according to the owner's manual. Note that this is an OEM replacement part and is sold individually. It is designed for Craftsman and MTD snowblowers, as well as models from Ryobi, Huskee, Cub Cadet, Yard Machines, Yard-Man, and Troy-Bilt.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

This replacement part is an auger axle. It is a genuine replacement part made by MTD. The auger axle typically assists the wheels in rotating in the proper direction during use. A new auger axle might be needed if the user notices that the wheels in the appliances are not rotating smoothly or at all. It is possible that after a long time of use the axle parts can become worn down or stripped due to normal wear and tear. If this is the case it is recommended that they be replaced as soon as possible. This axle auger is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part. Be sure to purchase the correct amount as many machines require more than one to operate correctly and run properly.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

This part is a replacement pin. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or broken pin in various models of small engine outdoor power equipment. Pins help to hold together different parts of the equipment whilst also being quickly and easily removable by the user for quick and efficient access. Pins can become corroded, broken, misplaced, or may be rendered otherwise defective and thus a replacement pin will be needed. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this pin, the appropriate owner's manual and equipment diagrams should be referred to. This pin is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractors and other small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This pin is a type of spring pin that keeps parts from sliding axially along a shaft. The spiral pin allows more flexibility and is better suited for heavy-duty applications. It keeps the components in place to actually process the snow coming through the snow blower. This product is a durable metal sheet, and replacement will be necessary when warping or breakage occur. This will be noticed if the axle spins without producing any kind of processing outcome. Snow buildup where a snow blower is being used is a good indication of this part needing attention. Replacement ranges in difficulty depending on the type of hole the pin is located in. See owner's manual for specific instructions on replacement. In most cases, a pair of pliers are needed for replacement. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man snow blowers. It is also an OEM part sourced directly from the manufacturer, and it is sold individually.