7909420 Parts

The Surface Element is an OEM part for Frigidaire ranges and cooktops.  This part serves as the heat source, supplying heat to the cooking area on top of the range. It provided consistent and efficient heating, contributing to better cooking performance. 

Causes may involve mineral deposits clogging the coils over many uses, physical damage from rough cleaning methods or cookware misuse.

Symptoms of a bad radiant element include:

• Slow or insufficient heating even on high settings
• Hotspots and inconsistent heat across the coil surface
• Discoloration, cracks or fragile sections of the coil
• Regular tripping of the circuit breaker or error codes

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door trim kit replaces the perimeter trim on the appliance door to restore a clean, factory finish. It covers and protects the door edges when the original trim is cracked, warped, or missing.

• Frames the door perimeter for a finished, uniform appearance
• Helps cover raw edges to prevent snags and rattling
• Replaces cracked, warped, or missing trim pieces
• Common signs include loose or missing trim, cosmetic damage, and gaps along the door edge

• Disconnect power (and gas, if applicable) and allow the appliance to cool before service
• Support the door; remove it if your service information recommends
• Carefully remove old trim; handle glass and sharp edges with cut-resistant gloves
• Align and secure the new trim; avoid overtightening fasteners and verify smooth door operation

This replacement refrigerator door handle provides a secure grip and restores safe, easy access to your refrigerator. It replaces a worn, cracked, or missing handle to improve function and appearance. What it does:

• Provides a sturdy grip to open and close the refrigerator door
• Replaces cracked, broken, loose, or missing handles and improves door usability
• Restores the cabinet's finished look by covering damaged or worn handle areas
• Helps maintain a proper seal by enabling correct door alignment when closed

• One refrigerator door handle

• Disconnect power to the appliance or unplug before working near electrical components
• Support the door while removing fasteners to prevent damage or injury
• Use the original screws and any mounting hardware;

This stainless steel cleaner restores and protects stainless surfaces, removing fingerprints, smudges and light soils to improve appearance and make routine cleaning easier. Safe for finished stainless when used as directed. What it does:

• Cleans away fingerprints, grease, and light residue from stainless surfaces
• Restores a streak-free shine and improves overall appearance
• Helps reduce visible smudges for easier routine maintenance
• Leaves a light protective finish that helps resist fingerprints between applications

• Read and follow the product label before use; test on an inconspicuous area first
• Apply to a soft cloth and wipe with the grain of the stainless; avoid abrasive pads
• Do not use on hot surfaces, painted finishes, or unsealed metals unless manufacturer approves
• Keep out of reach of children and avoid contact with eyes; if contact occurs, rinse thoroughly

This ceramic catalyst oven vent fits behind the oven broiler to help vent and break down cooking residues and odors at high temperatures, keeping oven air cleaner during cooking and self-clean cycles. It's a direct-replacement part when the original is cracked, clogged, or missing. What it does:

• Provides a heat-resistant vent surface that helps oxidize grease and odors that pass through the vent during use
• Helps maintain proper oven ventilation for consistent cooking and cleaner internal airflow
• Commonly replaced when the vent is cracked, glazed-over, excessively discolored, or emits persistent odors
• Works as part of the oven's venting system—does not affect electronic controls

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Allow the oven to cool fully; this part is installed inside the oven cavity or broiler area and may require removing racks or access panels
• Handle with care—ceramic components can crack if dropped or flexed; wear gloves to protect hands and avoid fingerprints on ceramic surfaces

This control panel is the front console assembly that houses the user controls and display, restoring proper button access and visible status indicators so you can select cycles and monitor operation. What it does:

• Provides the tactile buttons and display area for user input and cycle selection
• Protects and aligns the underlying electronic controls and switches
• Restores readable status lights and labels that indicate selected settings
• Commonly replaced when buttons are unresponsive, cracked, or cosmetic damage prevents normal use

• One control panel/console assembly

• Verify power is disconnected before starting any repair to avoid shock or damage
• Replacement typically requires removing the outer cabinet or control trim; keep hardware organized
• Inspect underlying switches and wiring during installation; replace any damaged fasteners or clips
• Recheck connector seating and wiring harness integrity after installation

A snap-on protective cap that covers and shields small appliance terminals, posts or hardware from dirt, moisture and accidental contact. Restores the finished appearance and helps reduce corrosion or shorts from exposed connections. What it does:

• Covers exposed terminals, posts or fasteners to keep out debris and moisture.
• Helps prevent accidental contact that can lead to electrical faults or shorts.
• Restores cosmetic finish when a cap is missing, cracked or deformed.
• Common symptom: visible exposed terminal/post or a loose/rattling trim piece.

• Typically installs by pressing the cap onto the mating post until fully seated.
• Always disconnect power to the appliance before accessing electrical components.
• Inspect the mating post or terminal for damage before installing; replace if damaged.

This sealing cap covers and protects an unused or service opening to help keep moisture, dirt and debris out of the appliance. It preserves component access while preventing contamination. What it does:

• Seals an exposed port or opening to reduce the chance of leaks or contamination
• Keeps dust, lint and pests from entering internal components
• Helps maintain a clean service area around valves or connectors
• Supports reliable operation by protecting small openings from damage

• Always disconnect power (and water, if applicable) before accessing internal parts
• Replace damaged or brittle caps to ensure a proper seal

This main top assembly replaces the top surface of the cooktop and provides a stable mounting surface for burners, grates, and controls. Restores a secure, finished surface for safe cooking and proper component alignment. What it does:

• Replaces a worn, dented, or damaged cooktop top to restore a flat, stable surface
• Secures surface burners and grates in correct position for even cooking
• Helps prevent heat and spills from reaching internal components
• Addresses symptoms like warped or rusted top, loose burner mounts, or poor grate fit

• Disconnect electrical power (and gas supply for gas ranges) before starting any work
• Remove burner grates and elements as required; some components may need to be transferred to the new top
• Use basic hand tools; avoid over-tightening fasteners to prevent damage