79572597712 Parts

This sheath heater is the dryer's tubular heating element assembly that warms air for drying cycles. Replace a failed sheath heater to restore normal drying performance and consistent heat output. What it does:

• Houses the dryer's heating element and produces the hot air needed to dry clothes.
• Common symptom: dryer runs but produces little or no heat, leaving loads damp.
• May show visible damage, burn marks, or cause repeated thermal cutoff trips when failing.
• Works as part of the dryer's heating assembly; replace only with the correct OEM part.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle the element and terminals carefully; avoid contact with exposed heating coils and sharp edges.
• Verify wiring and mounting fit, and inspect related parts (thermal fuse, thermostats) for damage.

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This LED assembly restores screen illumination by replacing a failed backlight strip. It helps return even, bright lighting to the LCD panel so pictures and menus are visible again without the dim or dark display caused by burned-out LEDs. What it does:

• Replaces the display backlight to restore screen brightness and uniform lighting
• Can resolve symptoms like dim display, dark bands, flickering backlight, or no visible picture with audio
• Works as the LED lighting component mounted behind the LCD panel to illuminate the image
• Designed to match the original LED layout and connector for a direct replacement

• One LED assembly (backlight strip) as shown

• Disconnect power and remove the display panel and bezel before replacing the assembly
• Handle the LCD and LEDs carefully to avoid damage; avoid touching LED surfaces and circuit traces
• Observe ESD precautions and use appropriate tools;

This lever-style control button replaces a worn or broken control-panel button to restore reliable push-button operation and user input. Designed to match OEM fit and tactile feel for proper engagement with the switch mechanism. What it does:

• Acts as the user-facing push lever for a control switch or button assembly
• Restores proper button travel and tactile feedback when the original is cracked, loose, or missing
• Prevents intermittent or unregistered button presses caused by damaged button hardware
• Works with the existing switch and bezel to complete control-panel input

• Disconnect power (unplug appliance or turn off breaker) before starting any repair.
• Remove the control panel or bezel per your model's service instructions to access and replace the button.
• Inspect the mating switch and surrounding clips; replace any damaged retainers for secure fit.

This dispenser lever is the replacement push paddle that activates a refrigerator's water and ice dispenser. It restores a solid, responsive surface for pressing the dispenser controls to deliver water or ice. What it does:

• Replaces a cracked, loose, or worn dispenser paddle that won't reliably trigger dispensing
• Provides a firm surface that engages the dispenser switch when pressed
• Helps stop leaks or jams caused by a broken or misshapen lever
• Restores normal dispenser operation and user control

• Disconnect power and turn off the water supply before starting any work
• Remove the dispenser bezel or cover as needed to access and remove the old lever
• Handle plastic parts carefully to avoid cracking; align tabs and clips before snapping into place
• Inspect the switch and actuator for damage

This replacement drip tray catches and channels water beneath the appliance to prevent leaks and pooling. It helps maintain proper drainage and reduces the chance of water damage under your refrigerator or freezer. What it does:

• Collects condensation, defrost water, or minor leaks to keep the cabinet floor dry
• Directs water to the evaporator or drain system so it can safely evaporate
• Helps prevent pooling that can lead to odors or mildew
• Restores a damaged or missing tray to stop water from dripping onto the floor

• For safety, unplug the appliance and shut off water supply (if applicable) before installing
• Slide or snap the tray into the designated location; ensure it seats fully and aligns with the drain path
• Inspect surrounding seals and drain channels for blockages or damage while the tray is accessible

This Hinge Cover Assembly protects and conceals the door hinge area, restoring a clean appearance and preventing dirt or loose clothing from catching in the hinge. Fits where a cosmetic or protective hinge cover is needed. What it does:

• Covers the door hinge to shield moving hardware from debris and reduce pinching hazards
• Restores a finished look to a damaged or missing hinge area
• Helps keep lint, dust and small objects away from the hinge mechanism
• Can reduce noise caused by exposed hinge components when intact

• One Hinge Cover Assembly as shown

• Intended for drop-in replacement; follow your appliance's service manual for disassembly steps
• Disconnect power and water before starting any repair
• Handle plastic parts carefully to avoid cracking; use appropriate fasteners and torque per OEM guidance
• If hinge or mounting hardware is damaged, replace those components before installing the cover

This harness assembly is a factory-style wiring harness that routes power and control signals between the dispenser, ice maker and main control—restoring electrical connections for reliable dispenser and ice-maker operation. What it does

• Carries power and signal lines between the refrigerator control board, dispenser and ice maker
• Restores lost or intermittent dispenser power and control communication
• Helps stop intermittent ice-maker cycling or dispenser failures caused by damaged wiring
• Eliminates loose, corroded or broken connector problems on the original harness

• One harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle connectors gently and match keyed plugs to their mating sockets
• Inspect connector pins and wiring routing; replace any damaged clips or grommets