79573163160 Parts

This rail guide assembly supports and guides a refrigerator drawer so it opens and closes smoothly and stays aligned. Replace a worn or broken rail to restore proper drawer movement and prevent sagging or sticking. What it does:

• Supports the drawer on its track and helps keep it level during operation
• Guides the drawer to glide smoothly and prevents binding or catching
• Replaces damaged or cracked rails that cause noisy, uneven, or misaligned drawers
• Helps maintain proper drawer seal and storage alignment

• Disconnect power to the appliance before beginning repairs
• Remove the drawer and any obstructing shelves to access the rail assembly
• Inspect mounting clips and screws; replace any damaged fasteners as needed
• Reinstall drawer and test movement; do not force parts into place

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This decor cap is a small exterior trim piece that restores the finished look of the refrigerator door and covers fasteners or exposed edges. It helps maintain the appliance's appearance and protects underlying hardware from dust. What it does:

• Covers and protects exposed screws or trim edges on the refrigerator door
• Restores a clean, finished appearance to damaged or missing trim areas
• Helps prevent dirt and moisture from contacting underlying hardware
• Commonly used when replacing door trim or after hinge/fastener service

• One decor cap

• High-level replacement only; typically snaps or slides into place over the trim area
• Power off and empty nearby shelves if removing heavy items to access the cap safely
• Use non-marring tools to pry gently if needed to avoid scratching surrounding surfaces
• Keep hardware organized and hand-tighten to avoid overtightening

This decorative cap is a small trim piece that restores the finished look of your refrigerator door or exterior trim where the original cap is cracked, missing, or worn. It helps hide exposed hardware and keeps the appliance looking complete. What it does:

• Covers exposed screws, fasteners, or trim edges to restore appearance
• Prevents dirt and debris from collecting in exposed openings
• Addresses cosmetic issues like cracks, chips or missing trim pieces
• Simple trim replacement to refresh the appliance finish

• One decorative cap

• Typically installs by snapping or sitting into the trim opening; handle gently to avoid breaking surrounding trim
• Keep small parts away from children and pets
• If working near electrical components or water lines, unplug the appliance or turn off water supply before starting

This lever spring is a small replacement tension spring that restores proper return and engagement for a lever assembly. It helps maintain reliable lever movement and secure latching where a worn or broken spring causes play or non-return. What it does:

• Provides return tension for a lever or latch assembly so the lever snaps back into place
• Helps maintain proper engagement of latch/actuator mechanisms
• Common remedy for a loose, sagging, or non-returning lever
• Works as a direct-fit replacement when the original lever spring is damaged or fatigued

• One replacement lever spring

• Disconnect power and/or unplug the appliance before starting any disassembly
• Handle small springs carefully; keep track of orientation and any retaining clips during removal
• Installation may require partial disassembly of the trim or latch assembly

This tension spring provides the restoring force for a moving component in select LG appliances, helping doors or internal mechanisms return to their resting position and maintain correct alignment. It's a small mechanical part that restores motion reliably when functioning. What it does

• Supplies tension to return or hold a moving part (door, hinge or internal linkage) in its intended position
• Restores smooth, consistent motion and helps prevent slamming or sagging caused by worn springs
• Common symptom: door or component does not return, feels loose, or has uneven movement
• Works as a direct-fit service part when the original spring has stretched, broken, or lost tension

• One spring (quantity: 1)

• Inspect the matching mounting points and hardware before installing; replace any damaged clips or pins
• Use care when removing/installing under tension; wear eye protection and follow safe-handling practices
• Only install the part in appliances that list the same part number/location; do not force mismatched parts

This evaporator assembly circulates refrigerant inside the freezer compartment to absorb heat and enable your refrigerator's cooling cycle. Replacing a damaged or corroded evaporator helps restore proper cold production and reduce ice buildup. What it does:

• Absorbs heat from the freezer compartment so the system can maintain low temperatures
• Enables proper refrigerant flow through the cooling circuit
• Common symptom indicators: persistent warm temperatures, excessive frost or ice buildup, or frequent compressor runtime
• Works with the appliance's defrost cycle to prevent long-term frost accumulation

• Disconnect power to the appliance before starting any repair
• Replacing this part may require removing panels, evacuating/recharging refrigerant, or accessing sealed refrigeration lines; have a certified HVAC/appliance technician handle refrigerant work
• Use proper tools and follow the manufacturer's service manual for torque and fastening details

This shelf assembly replaces a damaged or missing refrigerator shelf to restore stable storage and even cooling. Tempered-glass/trim construction provides a durable, easy-to-clean surface for storing foods and containers. What it does

• Provides a flat, stable surface for storing items inside the refrigerator.
• Helps maintain airflow and consistent cooling by sealing shelf area as designed.
• Replaces cracked, chipped or warped shelves that can cause spills or unstable storage.
• Fits into existing shelf tracks or support clips for secure placement.

• One refrigerator shelf assembly (glass shelf with trim as shown)

• Lift out existing shelf by sliding to the removal position; reverse steps to install.
• Handle tempered glass carefully and wear gloves to avoid cuts.
• No tools typically required; if clips or brackets are damaged, replace those parts separately.

This shelf assembly is a replacement ventilated storage shelf that restores organized, visible storage inside the refrigerator. It keeps lightweight items secure while allowing air circulation for consistent cooling. What it does:

• Provides a stable, ventilated surface for storing bottles, produce, and other items
• Replaces torn, sagging or missing net-style shelves that let items fall through
• Helps keep contents organized and easy to see and reach
• Maintains airflow compared with solid shelving, supporting even cooling

• Disconnect power or unplug the appliance before servicing
• Remove food and any items from the area before installing
• Typically installs by snapping into existing shelf rails or bracket slots; use only manufacturer-recommended fasteners
• If clips or mounting hardware are damaged, replace them to ensure a secure fit