8531282 Parts

This air diffuser light cover protects and finishes the refrigerator interior light and diffuser assembly, keeping the bulb shielded and helping direct light for even illumination. It restores the factory appearance and protective function. What it does:

• Covers and protects the interior light/diffuser assembly from debris and contact
• Helps direct and diffuse the light for more even interior illumination
• Replaces cracked, broken, or discolored covers that let the bulb show or look unsightly
• Restores the proper fit and appearance of the light assembly

• Disconnect power before servicing the appliance to avoid shock
• Handle the cover carefully to avoid scratching or cracking during installation
• Usually installs by snapping or securing into the light/diffuser housing—no modifications required
• If fasteners are present, retain and reuse the original screws or clips

This hinge shim corrects hinge spacing to help doors sit square and reduce rubbing or uneven gaps. It's a simple replacement used to restore proper door alignment so the door closes and seals more reliably. What it does:

• Adjusts hinge spacing to realign doors; use when a door leans or shows uneven gaps.
• Helps the door close and seal better by restoring correct hinge clearance.
• Prevents binding or rubbing that can occur when a hinge or door is slightly out of position.
• Small, low-profile shim used as a targeted fix without replacing the entire hinge assembly.

• Disconnect power to the appliance before starting; if applicable, shut off the water supply.
• Support the door while loosening hinge fasteners to avoid sudden movement or injury.
• Install the shim between hinge components as shown in the service diagram; retighten fasteners evenly.

This Support (mounting bracket) secures a panel or component to the appliance frame to restore stability and reduce vibration. Replacing a broken or worn support helps stop rattling, misalignment, and loose panels. What it does:

• Secures panels or components to the appliance frame; symptom: loose or sagging panel, visible movement.
• Reduces vibration and noise caused by a failed bracket; symptom: increased rattling during operation.
• Maintains alignment for moving parts or doors; symptom: binding, misalignment, or uneven gaps.
• Replaces cracked, bent, or worn supports to restore original fit and function.

• Disconnect power to the appliance (and shut off gas for gas models) before starting any repair.
• Basic hand tools are typically required; keep original screws and hardware unless new hardware is supplied.
• Follow the appliance owner's manual or service guide for model-specific steps and torque requirements.

This support is a replacement mounting bracket that helps secure internal components and restore proper alignment for reliable operation. Replaces a worn or broken support to reduce movement and rattling. What it does

• Holds and stabilizes internal assemblies or panels to maintain correct positioning.
• Prevents excess movement that can cause noise, rubbing, or misalignment.
• Commonly replaced when support is cracked, bent, or missing hardware.
• Helps restore normal fit and reduce wear on adjacent parts.

• One support (mounting bracket) as shown.

• Disconnect power and, for refrigerators, water supply before servicing to avoid shock or flooding.
• Basic hand tools typically required; follow OEM disassembly order to access mounting location.
• Inspect surrounding fasteners and adjoining parts; replace any damaged hardware for secure fit.

This grille enclosure replaces a damaged lower front grille to restore the appliance's appearance and protect internal components. It provides a secure cover that helps direct airflow and prevents debris from entering the cabinet. What it does:

• Covers and protects lower front components from dirt, dust and accidental contact
• Helps direct airflow around vents and intake areas for proper operation
• Restores a finished, gap-free appearance when the original grille is cracked or broken
• Reduces rattling caused by loose or damaged grille pieces

• One lower front grille enclosure

• Disconnect power before starting any repair to avoid electrical shock
• Remove nearby panels or kickplate screws/clips as needed for access
• Align tabs and secure with the factory screws or clips; do not force or bend mounting tabs

This heat shield protects nearby components from high oven temperatures, helping prevent heat damage and maintain safe operation. It's a direct-fit replacement designed to restore proper thermal protection. What it does

• Deflects and shields adjacent parts from radiant heat generated by the oven cavity.
• Helps prevent discoloration, warping, or premature failure of nearby panels and wiring.
• Can stop heat-related smells or scorching around the oven interior or cabinet.
• Restores intended oven airflow and thermal clearance when the original shield is damaged or missing.

• One replacement heat shield

• Disconnect electrical power (and shut off gas for gas ranges) before starting any repair.
• Handle carefully — edges may be sharp; wear gloves and eye protection.
• Verify correct mounting orientation and fasteners; reuse original screws if in good condition or replace with OEM-specified hardware.

This utility compartment housing is the outer cabinet piece that protects and secures the appliance's control area and internal components. It restores a clean, stable enclosure to prevent damage and exposure. What it does:

• Covers and protects the appliance's utility/control compartment from dust, debris, and accidental contact.
• Provides mounting surfaces and alignment for control modules, switches, and wiring harnesses.
• Restores proper fit to eliminate rattles, looseness, or gaps around the control area.
• Helps prevent exposed wiring or components that could lead to functional issues or safety concerns.

• Disconnect power before starting any repair to avoid shock or injury.
• Basic disassembly typically requires removing outer panels or the top cover; keep track of screws and fasteners.
• Handle with care to avoid scratching the finish or damaging mounting tabs; inspect clips and screw bosses before final assembly.

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

• Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
• Helps isolate vibrating components from appliance chassis to lower perceived sound.
• Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
• Useful when worn, detached or hardened factory pads allow increased noise.

• One insul-sound deadening pad

• Disconnect power before servicing an appliance to avoid shock or injury.
• Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
• Replace only in the original location; do not cover vents or moving parts.
• If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

This condenser bracket assembly secures the refrigerator condenser in place to prevent movement and vibration, helping maintain proper airflow and reduce noise from loose components. What it does:

• Holds the condenser coil or condenser assembly firmly against the cabinet/frame
• Prevents rattling or vibration that can cause noise during operation
• Keeps the condenser positioned for consistent airflow around cooling components
• Replaces damaged, bent, or missing condenser mounting hardware

• Disconnect power to the appliance before starting any repair
• Wear gloves to protect hands from sharp sheet metal edges
• Basic hand tools (screwdriver/socket) are typically required; verify fastener types before beginning
• Inspect surrounding mounts and hardware; replace any damaged fasteners and torque to manufacturer specs