8Tw4676bqo Parts

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

This wire harness routes power and control signals between the appliance's electrical components, restoring proper connectivity and operation when the original harness is damaged or faulty. It's a direct-fit electrical assembly designed for straightforward replacement. What it does:

• Provides the main electrical connections between control, power source, and other components
• Replaces damaged, frayed, or burned wiring that can cause intermittent or complete loss of function
• Helps eliminate symptoms like no power to controls, intermittent operation, or blown fuses/trips
• Maintains factory-style connector fit and routing to reduce vibration and wear

• One complete wire harness assembly

• Always disconnect power (unplug or shut off circuit breaker) before inspecting or replacing wiring
• Route harness and secure connectors per the appliance wiring diagram to avoid pinching or heat exposure

This wire harness is a direct-replacement electrical wiring assembly that connects controls, switches and motors so your appliance can send power and signals where needed. It restores proper electrical pathways and helps components operate reliably. What it does:

• Routes and connects electrical power between controls, switches and motors
• Transfers control signals to start or stop appliance functions
• Replaces damaged or frayed wiring that can cause intermittent operation
• Commonly used when an appliance won't start, has intermittent power, or certain controls stop responding

• Disconnect all power before servicing to avoid shock or injury
• Verify connector alignment and seating; match wire colors and connector shapes
• Route and secure wiring away from moving parts, sharp edges and heat sources
• Replace the harness—do not splice unless explicitly approved by the manufacturer

Color: White

This outer door panel replaces a damaged or dented refrigerator door exterior to restore appearance and protect internal components. It fits the door shell and gives your fridge a finished, uniform look. What it does:

• Replaces a cracked, dented or scratched door exterior to improve appearance
• Shields inner door components and insulation from damage and moisture
• Helps maintain a smooth, sealed surface for normal door operation
• Compatible with factory mounting points for a direct-fit replacement

• Recommended: remove all food and disconnect power before starting repair
• Handle panel edges carefully — wear gloves to avoid sharp sheet-metal edges
• Reuse original screws and brackets unless damaged; verify alignment before tightening

This outer door panel restores the refrigerator's exterior appearance and protects inner components from damage. It replaces a dented, scratched, or corroded outer shell to improve fit, finish, and sealing surface alignment. What it does

• Replaces the refrigerator's outer door panel to restore cosmetic appearance
• Protects internal door components from moisture and impact
• Helps maintain door alignment and proper gasket sealing when undamaged
• Commonly used when the door has visible dents, rust, or significant surface damage

• Disconnect power to the appliance and remove any stored items from the door before starting.
• Some disassembly (remove trim, handles, hinges, and inner liners) is normally required; keep fasteners organized.
• Use care to avoid scratching the new panel during installation and to preserve door gaskets and insulation.

This evaporator fan circulates cold air across the evaporator coil to help maintain even temperatures inside the refrigerator. Replaces a worn or failed blower fan to restore proper airflow and cooling performance. What it does:

• Moves air over the evaporator coil so the fridge and freezer cool evenly
• Helps prevent temperature swings and localized warm spots
• Commonly linked to symptoms like reduced cooling, frost buildup, or a loud rattling/noise from the freezer area
• Works as part of the refrigerator's airflow system

• Disconnect power before servicing to avoid electrical shock
• Access typically requires removing interior panels or the freezer back panel; keep screws and fasteners organized
• Handle the fan blades carefully to avoid bending or damage
• After installation, restore power and confirm the fan runs and airflow is restored

This lint duct assembly channels dryer exhaust through the cabinet and toward the vent, helping trap lint and maintain airflow for efficient drying. Replace a damaged or clogged duct to restore proper venting and reduce lint buildup. What it does:

• Directs exhaust air from the drum to the vent path to support consistent drying performance
• Helps contain and route lint toward the lint trap area to reduce internal buildup
• Common part for symptoms like poor drying, overheating, unusual airflow, or visible lint leaks inside the cabinet
• Works with the dryer cabinet and venting components to maintain safe exhaust flow

• One lint duct assembly

• Disconnect power (and gas supply, if applicable) before service to avoid shock or injury
• Inspect surrounding seals, gaskets and the lint trap for damage during replacement
• Reinstall using OEM fasteners and confirm proper alignment to prevent exhaust leaks

This cabinet is the main outer housing that supports and protects the appliance's internal components while giving the unit its finished exterior. It restores structural integrity and proper panel alignment for safe, reliable operation. What it does:

• Provides the structural frame and mounting surface for controls, panels, and internal components
• Protects internal parts from dust, moisture, and incidental contact
• Helps maintain proper airflow and component positioning to reduce vibration and noise
• Restores correct panel alignment and closure when the original cabinet is dented, cracked, or corroded

• One cabinet

• Disconnect power (and gas, if applicable) before beginning any repair
• Installing may require removing trim, controls, and internal components; keep fasteners organized
• Use proper lifting technique and a second person for heavy or bulky cabinets to avoid damage or injury

The Seal is an OEM replacement part for Whirlpool dryers. It creates a tight seal between the dryer door and the drum, preventing heat and moisture from escaping during the drying process. It helps maintain the proper temperature inside the dryer, allowing your clothes to dry quickly and evenly.

Symptoms of a faulty door seal include:

• Heat escaping from around the dryer door
• Excessive moisture or lint buildup
• Extended drying times

A bad door seal can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as heat escaping from around the dryer door, excessive moisture or lint buildup, or clothes taking longer to dry than usual, it may be time to replace the door seal.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Door Strike is an OEM part for Whirlpool washing machines. It is responsible for securely latching and locking the washer door shut during operation.

Causes of a bad door strike can include wear and tear over time, damage or bending from repeated use of the door latch, or issues with other interacting locking components like the door latch.

Symptoms of a bad door strike include:

• The washer door not latching or locking fully
• The door popping or releasing unexpectedly during a cycle
• Potential for leaks if the door is not sealing tightly
• Safety hazard if the door cannot be securely fastened

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Clamp is an OEM part for select Whirlpool washing machine models. This clamp plays a crucial role in securing the washer's door seal or tub parts, ensuring a tight and leak-proof connection. 

Clamps in washers can become ineffective due to metal fatigue, corrosion, or damage during maintenance activities. A compromised clamp can lead to a loosened door seal or tub connections, resulting in potential leaks or operational inefficiencies.

Symptoms of a failing washer clamp include:

• Visible water leakage around the washer door or under the machine.
• The door seal appears loose or detached.
• Unusual noises during operation, indicating loose components.
• The washing machine vibrates more than usual, suggesting misaligned parts.
• Difficulty in securing the clamp during maintenance or part replacement.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.