91750 Parts

This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

This part is a replacement pivot bushing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or worn pivot bushing in a variety of lawn tractor models.Pivot bushings allow different components to pivot around one another without causing too much friction, vibration, or heat. Bushings are particularly subject to wear and tear and will likely need to be replaced when worn or ineffective in order for the lawn tractor to function properly. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this pivot bushing, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this pivot bushing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawnmower or an edger.The knob in a lawnmower or an edger might need to be replaced at some point within the typical lifespan of the appliance if it is faulty, damaged, or worn out from general wear and tear with long-term use. If the knob has fallen off, if pieces of it have chipped away over time, or if the knob is simply too damaged to serve its typical function, the knob should be removed and replaced by this genuine OEM replacement part. It is a very simple replacement process that will only require basic tools to properly execute.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This knob is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a discharge chute, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A discharge chute allows the user to operate the lawn mower with ease while ensuring that the grass clippings and debris are exposed of in the proper direction. If the current discharge chute is missing or damaged, the user might notice that grass and other debris are being expelled from the device differently than before. This can cause the work area to be messy and user might not be able to complete the lawn mowing job. Be sure the engine is turned off before replacing this chute.This discharge chute is sold as a single piece and is sourced directly from the manufacturer. This part is an OEM replacement part that is meant to fit on different models of lawn mowers. Refer to the owner's manual before attempting this repair.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a bushing. This is a genuine replacement part made by Husqvarna. This part is responsible for adding space in the engine so that parts are able to operate without becoming overrun with friction. This helps keep the engine operating smoothly and effectively. A new bushing might be needed if the user notices unusual noises coming from inside the machine. This can be due to an out-of-place bushing and should be investigated. Be sure the engine is completely powered off and cooled down as often these parts can be hot due to friction. Refer to the proper user manual for more information on how to replace this bushing. This bushing is made of durable metal for long-lasting use.This bushing is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement deck lift shaft spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, bent, or otherwise defective deck life shaft spring in lawn tractors.The deck lift shaft spring is part of the system that moved the lift shaft. This enables the user to adjust the lawn tractor's deck. With regular equipment use, this spring can become corroded, bent, stretched, or otherwise damaged. If this occurs, this part will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this deck lift shaft spring, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This deck lift shaft spring can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost hex nut in lawn tractors and other outdoor power equipment.Hex nuts are a standard piece of hardware that ensure components can be properly and securely fastened together. They will need to be replaced with a genuine OEM part if stripped, corroded, damaged, or lost. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex nut is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

This flange bearing is a genuine Husqvarna part, sold individually. This flange bearing can be used as a replacement part in a lawn mower. The purpose of the flange bearing in a lawn mower is to manage both radial and axial loads by maintaining two rings that rotate in different manners to facilitate different ranges of motion within the appliance.The flange bearing in a lawn mower might have to be completely replaced if the flange bearing cannot perform its critical function due to damage from general wear and tear or as the result of an accidental collision with a hard object. If the flange bearing is dented, punctured, torn, eroded, warped, or damaged, the flange bearing should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This flange bearing is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This hex nut is a genuine Husqvarna part, sold individually. This hex nut can be used as a replacement part in a lawn mower. The purpose of the hex nut in a lawn mower is to secure a component to another component in conjunction with a bolt so that, during the standard operation of the lawn mower, the components do not move from their position of stable placement.The hex nut in a lawn mower is a small component, and its size means that it can be easily lost, misplaced, or stripped from general wear and tear with long-term use. The hex nut could also be damaged as a result of a collision with a hard object such as a rock or a curb. If any of this occurs, the hex nut should be replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This replacement part is a hair pin and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Hair pins are an important part of many different types of machinery as they hold other parts in place and secure. A new hair pin might be needed if the current ones are loose or missing. It is common that hair pins might become stripped overtime and will need to be replaced. Be sure to double check the size of the hair pin as many places on lawn equipment will require different sizes of this part. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.