96573213 Parts

This precision-drilled burner orifice is sized for Type 4 butane applications. It meters gas to the burner so flames ignite reliably and burn cleanly when the appliance is configured for butane per the manufacturer's specifications. What it does:

• Regulates gas flow to the burner head for proper flame size and shape
• Type 4 drilling intended for butane gas configurations specified by the manufacturer
• Replaces a missing or stripped orifice during service or gas-type conversion

• 1 burner orifice (Type 4, butane)

• Shut off gas supply and power; allow the appliance to cool before service
• Access the orifice at the burner base/manifold; remove the original with the correct wrench or socket
• Start threads by hand; tighten snugly—avoid overtightening or cross-threading
• After reassembly, leak-check with soapy water and verify flame; gas conversions should be performed following OEM instructions and local codes

This replacement part is a deck belt intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Deck belts link various rotating shafts to ensure that the entire machine is running smoothly and efficiently. A new deck belt might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the deck belts are malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This riding lawn mower muffler is a replacement part for mowers that have a bad or damaged muffler. The muffler reduces the amount of exhaust noise that comes from the mower. It is also needed to prevent exhaust sparks from igniting dry leaves, grass, or other debris on the ground. Without a muffler, it could also allow cool air to get into the exhaust valve, which could cause the engine to lose compression. This could mean needing a valve replacement. The muffler on a riding mower can become damaged and have other issues after a couple of seasons. A buildup of soot in the muffler can cause it to be less effective. Additionally, the muffler could develop small holes or cracks that will reduce or eliminate its effectiveness entirely. When the muffler is no longer working properly, or if it has been several seasons, it is a good idea for owners to replace the muffler. This is a genuine OEM part sourced from the manufacturer. It can be used with riding mowers from a range of manufacturers including Ryobi, Husqvarna, Poulan, Craftsman, Jonsered, and Ariens.

This is a replacement air purge bu. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective air purge bu on various models of small outdoor power equipment. The air purge bu purges air from the carburetor and then circulates fuel from the fuel tank back into the carburetor, enabling the engine to start. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near to an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this air purge bu, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this air purge bu is suitable for use on several different models of small engine power equipment manufactured by Husqvarna, Jonsered, Craftsman, MTD, and other manufacturers. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This is a replacement wiring harness that can work with a range of lawn tractors and mowers. The wiring harness features organized wires, terminals, and connectors that run throughout the mower to relay information and electrical power. It connects the components of the machine. If an owner notices that there are problems with the electrical features of the mower, it could be the wiring. A new harness might be needed.The wiring harness should last for a long time, but many potential problems could arise. The sheathing could start to wear out, exposing wires. Some of the wires could be damaged or cut, and some of the plastic components could break and no longer connect properly. Check their harness and replace it if needed.This wiring harness is compatible with many models of machines from Husqvarna and Poulan. The harness is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This part is a chain tensioner kit that is used on chainsaws. A chain tensioner kit allows the operator to tension the chain. This kit includes the adjustment bolt, pin, gear, and o-rings. The parts in this kit are manufactured out of high-quality and durable metal. A new chain tensioner kit may be needed if the bar does not adjust when the operator turns the tension screw. If this is the case, this usually means that the adjustment bolt is worn or damaged. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This chain tensioner kit is a genuine Husqvarna part. It is sold individually. This particular chain tensioner kit is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This part is a clutch that is used on lawn tractors and riding lawnmowers. A clutch transfers the power from the unit's engine to the drivetrain and is responsible for engaging the blade.A new clutch may be needed if the lawn tractor or riding lawn mower will start but then stalls. If the clutch is sticky or if it operates hard, it may be time to replace the clutch. If the engine is revving higher than usual or if there are strange noises coming from the clutch, it is likely that the clutch could be going bad. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clutch is a genuine Husqvarna part. It is sold individually. This particular clutch is compatible with lawn tractors and riding lawnmowers that are manufactured by Husqvarna and Poulan.

Husqvarna brand Pivot Section Drive Control/Pivot Bar

This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.