Bosch 00649288 Parts

A spark plug is a component within a combustion engine system that ignites the fuel/air mixture and generates a tiny explosion that is what makes power inside the engine. When the generator fails to fire and no power is generated, it is time to replace the spark plug. While an engine may start when it has bad spark plugs, it will often accelerate slowly, use fuel inefficiently, or misfire, too. This is not a difficult repair and should take no more than an hour to complete. It will require a spark plug socket wrench, ratchet, screwdrivers, and a gapping set. The spark plug has a lead that is not touching the other plug, but which is close enough to generate an arc of current and create the electricity for a spark. Be sure that the plug has the correct gap. This is an OEM replacement spark plug designed for use in Generac generators and pressure washers. This part is sold individually.

This replacement part is a brush holder assembly intended for use in generators. This is a genuine replacement part made by Generac Generators. Brush holders in generators are use as the connecting piece between stationary wires and other moving parts. This is an important part as they conduct the electric current inside the machine so it is able to operate smoothly.A new brush holder assembly might be needed if the machine is unable to start or if it stops abruptly during use. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with generators made by Generac Generators.

This part is a replacement tri LED display. This part's intended use is to replace a broken or defective tri LED display in generators.This part is important for safe and proper equipment usage and thus should be kept in good working condition. If broken, cracked, faulty, or burnt out, this part will need to be immediately replaced with a genuine OEM replacement part. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning any repairs.This is an authentic OEM replacement part from Generac made of high-quality materials. This tri LED display can be used with different models of generators that have been manufactured by Generac, Siemens, Honeywell, and some other brands. It is sold individually.

This vibration mount grommet is used on generators. The purpose of this part is to dampen the vibrations and reduce the shock inside of the generator. These grommets act as a cushion between two parts.New vibration mount grommets may be needed if there is excessive vibration with the generator. This vibration may cause an increase in noise from the unit. The user may notice clunking or banging sounds if these parts are not effectively dampening the engine's vibrations. Upon inspection, there may be physical damage to the black or silver portions of the part, in which case the part will need to be replaced. Allow time for the generator to cool down completely before attempting to replace or repair any components.This vibration mount grommet is sold individually and is an OEM part sourced directly from the manufacturer. This part is compatible with generators that are manufactured by Generac.

This part is an ATO fuse for air conditioners and generators. A fuse breaks the circuit in the event that there is a fault in the machine that results in too much current to flow. It protects the machine from damage, and will burn out when activated. It may also break due to exposure to the elements.A new fuse may be needed if there is a gap in the wire or if there is darkness inside where the fuse has burned due to an overload. The user can also use a multimeter to measure the resistance of the fuse element to determine if it has gone bad. If the fuse is replaced and immediately goes bad, additional diagnostics should be done to determine the cause.The ATO fuse is a genuine OEM part from the manufacturer and is sold individually. This fuse is compatible with air conditioners and generators that are manufactured by the Generac and Carrier brands.

This is a replacement eye hasp designed to hold the control module in place on generators. The eye hasp connects the back of the control module to the body of the generator and holds it in place with a bolt that fits through the eye. Because this part does not move, it will suffer from only minor wear and tear. The primary risk is from rust due to exposure to the elements. If the eye hasp becomes severely rusted or is damaged or lost when removing the control panel, it will need to be replaced.Replacing the eye hasp is not difficult, but will require the removal of the entire control panel from the generator. Once the module has been removed, locate the mounting point where the hasp attaches to the control module and remove the hasp. Install the replacement hasp and then reattach the control module to the generator body.This genuine OEM part is manufactured by Generac and fits several portable generators the company makes. It is sold individually.

An alert oil unit is an important piece to prevent issues with portable generators made by Generac. The alert oil unit part is crucial to prevent the portable generator from using up all the oil without the user knowing. The purpose of the alert oil unit is to alert the machine owner or operator once the oil in the generator gets too low. The replacement or repair process of the alert oil unit should be straightforward, but always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This alert oil unit is essentially a safety switch that will prevent the engine of the portable generator from being ruined if it runs out of oil. This alert oil unit is an original OEM part sourced directly from the manufacturer, Generac. It is sold individually.

This carburetor gasket manages airflow around the motor. It is part of all carbureted engines and if it malfunctions, it allows air to be where it shouldn't. This alters the air to fuel ratio and can cause reduced performance or failure. If the gasket fails, it needs to be replaced promptly, because the engine will still run but will suffer damage if the gasket is allowed to leak air into or out of the motor. Replacing this part means taking apart the carburetor and cleaning all of the different components. It may also mean using the appropriate gasket sealer, though this varies based on the make and model of the engine or machine. This genuine OEM carburetor gasket is designed for Generac portable generators. It is shipped individually and will not include any other items, including sealants or oils.

The air cleaner gasket is placed between the air cleaner and the carburetor, which can help to ensure that the carb is getting the correct amount of air, while also providing some protection. The gasket can start to wear out eventually. It might become brittle and crack, or it might no longer sit properly, reducing its efficiency. If the air cleaner gasket has problems, it is important to replace it as soon as possible. Gaskets that are not working properly and that allow too much air to pass through could cause the engine to have trouble starting and operating. Replacing the filter is relatively simple. The air cleaner gasket is an authentic OEM part that is sold separately. This gasket is for use with power washers and generators from the Generac brand.

Created for use with pressure washer by Generac, this fuel filter is an important component of the machine. A fuel filter has the responsibility of removing dirt and debris found in fuel so that it doesn't pass through to the carburetor. Having a maintained fuel filter in a pressure washer is important since even small particles could reach the carburetor. All fuel filters should be inspected on a regular basis and replaced about once a year.If the fuel filter needs to be replaced, the pressure washer should be placed on a level surface and the spark plug boot needs to be removed. Remove any fuel in the washer and then use a hooked piece of wire to pull out the fuel filter. Take the line in one hand while working to bring the filter out. Once it's out, put the new filter on the fuel line and work it inside. The filter will go into the tank and can be refilled with fuel before replacing the cap.This fuel filter is designed for use on Generac pressure washers. It is a genuine OEM product directly sourced from the manufacturer. It comes as a single individual part.

The way that a pressure washer works is simple, but there are also simple issues that can cause trouble with the machine. Pressure washers have both a water filter and an air filter to prevent debris from causing trouble in the machine. The air filter stops dirt and dust, as well as debris, from making it into the carburetor and causing the engine to run poorly or stall. As part of regular maintenance on a pressure washer's engine, it is a good idea to replace both the air and the oil or fuel filters. This is an OEM replacement part that will require a short amount of time and the use of a wrench set and pliers to make the change. This replacement pressure washer filter is designed to work with Generac pressure washers and effectively capture any contaminants that might enter the carburetor and then the engine itself. It works with a long list of Generac models, and is an easy part to replace.