Gxrtqr Water Filter Parts

The Sump Housing O-Ring is an OEM part for GE water filtration systems. This O-ring creates a watertight seal between the sump housing and the water filter, preventing leaks and ensuring the filtration system operates efficiently.

Causes of a bad O-ring can include wear and tear over time, deterioration due to exposure to water and chemicals, or physical damage from improper installation or handling. These issues can lead to the O-ring losing its flexibility and effectiveness.

Symptoms of a bad O-ring include:

• Water leaks around the filter housing
• Difficulty achieving a tight seal when installing the filter
• Visible cracks or deformation in the O-ring
• Reduced water pressure or flow from the filtration system

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

RO cartridge is a reverse-osmosis membrane cartridge that restores filtration performance in compatible RO systems, improving water clarity and taste by removing dissolved impurities when an existing membrane is worn or fouled. What it does:

• Replaces a worn RO membrane to restore filtered water production and quality.
• Helps reduce common tastes, odors and cloudiness caused by dissolved contaminants.
• Common symptoms of a failing membrane: reduced RO faucet flow, poor-tasting or cloudy water, or elevated TDS readings.
• Use as a direct replacement in compatible GE reverse-osmosis housings and filtration systems.

• Turn off the feed water supply and open the RO faucet to relieve system pressure before servicing.
• Inspect seals and O-rings; replace or lightly lubricate per OEM guidance to ensure a proper seal.
• After installation, flush the system per manufacturer instructions to remove air and loosened particles.

Pre & post reverse osmosis filters.

Screen cone is a replacement cone-shaped screen that helps keep lint and debris out of the appliance's drain and pump area, reducing clogs and helping protect pump components from wear. What it does:

• Traps lint and loose debris before it reaches the drain and pump assembly.
• Helps maintain proper draining and reduces the chance of recurring clogs.
• Reduces stress and potential damage to the pump impeller caused by foreign debris.
• When worn or missing, common symptoms include slowed draining, recurring clogs, or unusual pump noise.

• Disconnect power to the appliance (unplug or shut off breaker) before accessing the pump/drain area.
• Turn off water supply if required by your model and drain remaining water before removal.
• Replace the old screen cone with the new unit, ensuring it seats fully in the housing; no special tools are typically required.

This chrome faucet base provides the finished mounting surface for a refrigerator water dispenser, restoring appearance and supporting the spout assembly for reliable operation. Fits OEM dispenser assemblies that use a separate base. What it does:

• Secures the dispenser spout and helps maintain a stable, centered water outlet.
• Replaces cracked, corroded or damaged bases that can cause wobbling or cosmetic defects.
• Restores the chrome finish for a clean, finished look at the dispenser opening.
• Helps eliminate drip points and misalignment commonly noticed around a worn base.

• Turn off the refrigerator power and water supply before beginning any repair.
• Remove the spout and retaining hardware to access and replace the base; basic hand tools typically required.
• Inspect O-rings/gaskets when installing and replace any worn seals to prevent leaks.
• Reassemble carefully and check for leaks; avoid over-tightening to prevent damage to the finish or housing.

Diaphragm kit replaces a worn flexible diaphragm and seals used in the appliance's valve assembly, restoring proper sealing and valve action to help prevent leaks and intermittent operation. What it does:

• Replaces the flexible diaphragm that forms the internal seal in a valve assembly.
• Restores proper valve sealing to help stop leaks and maintain correct fluid flow.
• Can resolve symptoms like intermittent valve operation, failure to fill, or reduced flow.
• Helps return smooth actuator movement and consistent valve response.

• Disconnect power and shut off any water or gas supplies before beginning service.
• Use basic hand tools and follow the appliance's service diagram for correct valve access.
• Inspect valve housing and mating surfaces; replace the whole kit if any mating surfaces are damaged.

This check valve kit helps prevent backflow and keeps appliance water flow moving in the correct direction to protect internal components and maintain correct water delivery. It's a small replacement kit for the appliance water system. What it does

• Stops reverse flow that can cause contamination or pressure issues in the water line
• Helps maintain steady water flow to ice makers, dispensers, or inlet systems
• Can reduce intermittent filling problems caused by a failed check valve
• Functions as a one-way valve to protect downstream components

• One check valve kit

• Turn off water supply and unplug the appliance before starting work
• Use proper tubing connectors or clamps; replace any damaged hoses

This manifold assembly routes and controls gas from the regulator to the cooktop burners, restoring proper fuel distribution for reliable burner operation. Fits the OEM mounting and connection points for direct replacement. What it does:

• Distributes gas evenly from the regulator to individual burner valves for consistent flame
• Replaces a cracked, corroded, or damaged manifold that causes weak or uneven flames
• Addresses ignition or lighting issues when burners won't receive fuel
• Helps stop intermittent gas flow that can cause sputtering or low heat at burners

• One complete manifold assembly as shown

• Turn off the gas supply and electrical power before starting work
• Use proper gas connections and check all fittings for leaks with a soap solution or leak detector

This inlet cover is the exterior housing that protects the appliance's inlet area, keeping connections and wiring secure and reducing dirt entry. It restores the inlet opening to factory appearance and helps maintain safe operation. What it does:

• Covers and protects the inlet opening and associated wiring or fittings
• Helps prevent dirt, debris, and accidental contact with inlet components
• Restores original appearance where the inlet housing is cracked or missing
• Common symptom: visible damage, cracks, or loose inlet housing exposing connections

• High-level: replacement generally requires removing a small number of fasteners; follow the appliance service manual for exact steps
• Disconnect power (and water, if applicable) before starting any work
• Use appropriate tools and avoid forcing clips or tabs to prevent further damage
• Order replacement fasteners separately

Replacement pre/post reverse-osmosis (RO) filter cartridge that helps trap sediment and reduce chlorine taste and odor before and after the RO membrane, improving water taste and protecting downstream components. What it does:

• Captures sediment and particulate that can cause cloudy or gritty water
• Reduces chlorine taste and odor that affects water flavor
• Protects the RO membrane and downstream fittings from premature fouling
• Helps restore expected water taste when existing filters are spent

• Turn off the water supply and relieve system pressure before servicing the RO system
• Follow the OEM service manual for correct filter orientation and sealing procedures
• Inspect and replace any worn O-rings or seals to prevent leaks; lubricate with food-grade silicone if recommended
• Dispose of used filter cartridges according to local regulations

This flow control kit regulates the water flow rate in your water softener during brine draw and rinse cycles. Replacing a clogged or worn flow control helps restore proper regeneration performance and more consistent soft water. What it does:

• Maintains the designed flow rate through the venturi during regeneration
• Supports proper brine draw and rinse for effective resin cleaning
• Helps prevent over/under flow that can reduce softening performance
• Symptoms may include weak or no brine draw, incomplete regeneration, or persistent hard water

• One flow control kit

• Unplug the unit, place the softener in bypass, and shut off the water supply; relieve system pressure by opening a nearby faucet
• Keep the work area clean; note the orientation of each component during removal
• Install the new parts in the same order and seating depth; do not overtighten plastic components
• Return to service and run a manual regeneration; check for leaks and proper operation