Kwc360jss1 Parts

Note: This is a quantity of (1) filter. The thumb screw is part of the filter and not sold separately.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This replacement filter screens out contaminants to protect your appliance's internal components and maintain performance. Replacing a worn or clogged filter helps ensure proper flow and reduces buildup that can lead to inefficiency or damage. What it does:

• Traps debris and particulates before they reach critical components
• Helps maintain proper airflow or circulation for consistent performance
• Reduces residue buildup that can cause odors or poor results
• Replace if torn, warped, saturated, or visibly clogged

• 1 filter

• Disconnect power; allow hot surfaces to cool and/or shut off water if applicable
• Access the filter location; release retaining tabs or fasteners and remove the old filter
• Clean the housing if needed; seat the new filter fully in the correct orientation
• Restore power and test operation

This interior appliance light bulb restores bright, reliable illumination inside your appliance. Replace a burned-out or broken bulb to easily see contents and monitor progress without keeping the door open longer than necessary. What it does:

• Provides interior illumination for the appliance cavity
• Activates with the door switch or light control
• Restores clear visibility to shelves, racks, and compartments
• Common symptoms: no light, dim or flickering light, blackened/broken bulb

• Includes 1 replacement light bulb

• Disconnect power to the appliance before servicing
• Allow the bulb and surrounding area to cool completely
• Handle the new bulb with a clean cloth or gloves; do not overtighten
• Replace only with the bulb style and wattage specified for your appliance

Note: Per factory, this is one filter. Order quantity needed.

This slide switch is the user control that changes settings by sliding a selector—commonly used on appliance control panels to select cycles or options. It restores reliable tactile control and clear position feedback. What it does:

• Acts as the sliding selector on the appliance control panel to change settings or modes
• Completes or interrupts the control circuit when moved to different positions
• Commonly replaces a worn, sticky, or non-responsive selector that fails to change settings
• Helps eliminate intermittent or no-response symptoms caused by a damaged slide actuator

• One slide switch

• Disconnect power before attempting replacement to avoid shock or injury
• Access may require removing the control panel or console—keep fasteners organized
• Verify switch orientation and wiring before disconnecting; note wire locations or take a photo
• No calibration is typically required after replacement; test functions before full reassembly

This slide switch replaces a worn or broken control selector to restore reliable user input on the appliance console. It provides the mechanical sliding contact needed to select cycles or settings and improve control responsiveness. What it does:

• Acts as the console selector by opening/closing circuits when the slider is moved
• Restores lost or intermittent control caused by worn contacts or a stuck slider
• Common symptoms: selector won't move, settings don't change, or console input is unresponsive
• Simple mechanical replacement — no programming required

• Disconnect power before servicing to avoid shock or injury
• Remove the control panel or trim as needed to access the switch; keep screws and small parts organized
• Disconnect electrical connectors gently; do not pull on wires
• Test function before reassembling the panel

This refrigerator water filter cartridge removes common particulates and helps improve water taste and odor for built-in fridge dispensers. It replaces a used filter to restore clearer, better-tasting water to your dispenser and icemaker. What it does:

• Filters sediment and particulate contaminants from the water supply
• Helps reduce chlorine taste and odor for improved drinking water
• Supplies filtered water to the dispenser and icemaker when properly installed
• Helps prevent debris from reaching internal water lines and components

• Turn off the water supply to the refrigerator and follow the refrigerator manufacturer's removal/installation steps
• Push, twist, or pull per your refrigerator's filter access design; ensure a secure fit and clear seals
• After installing, flush several quarts of water through the dispenser to clear air and settled carbon fines
• Dispose of the used filter according to local regulations; follow the refrigerator manufacturer's recommended replacement interval

This is a transformer intended for use with kitchen range hoods. This component is part of the power system for the appliance. It is designed to supply low voltage range hood parts like fa controls and lights. If the transformer is damaged or no longer working, the lights may not come on, the fa controls may not work, or various parts may only work part of the time. When the transformer is damaged, it will need to be replaced.When replacing the range hood transformer, make sure the range hood is not connected to power. Wear work gloves to protect the hands and make sure a basic set of tools is available. The range hood can be removed from the wall for easier access to the internal parts. Disassemble the appliance to gain access to the transformer. Take the transformer out and replace it with the new replacement part. Replace the range hood and reconnect the appliance to power before testing.This component is sold as a single part. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The transformed is made to be used with range hoods created by KitchenAid.

Color: Stainless. For black use W10021860. For white use W10021870

Color: White. For black use W10021860. For stainless use W10021850.

This terminal is an electrical connector that provides a secure point for wiring connections, helping restore reliable power flow to the appliance. It replaces a worn or damaged connector to reduce arcing and intermittent operation. What it does:

• Provides a secure connection point for wiring to controls, motors, heaters or other components
• Restores reliable electrical contact when a terminal is corroded, loose or burned
• Helps stop intermittent power, arcing, or overheating caused by poor connections
• Maintains proper circuitry continuity for safe operation

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Take a photo or label wires before removing the old terminal to ensure correct reassembly
• Remove panels or covers as needed to access the terminal; replace with the same orientation and tighten connections securely
• Inspect adjacent wiring and terminals for damage; if heat or corrosion is present, replace affected parts

Color: Black. For white use W10021870. For stainless W10021850